Category:Reciprocating Saws

From Artisan's Asylum

Jump to: navigation, search
Tool Species
Reciprocating Saws

A tool species is a logical grouping of tools based on similarity of function, use, and safety.

Asylum Tool Species Info
To use any of the tools listed on this page, you are required to complete the testing program described here. You should get training or equivalent experience at the Asylum or elsewhere before testing.
RubricReciprocating Saw Rubric
TrainingTool Training: Basic Woodworking Tools
TestingTool Testing Calendar
Operational Status
Operational Status
Maintenence Tickets

This document is an internal Artisan's Asylum training document and is provided "as is", to be used as a reference only. Use of this document for any purposes other than as reference material (i.e., for the purposes of training and testing users on tools or equipment by other commercial entities or individuals) is not advised. In no event shall the authors of this material, or Artisan's Asylum, Inc., be liable for any claim, damages, or other liability whether in action or contract, arising from, out of, or in connection with the use of the information in this document for training, testing, or on-going safe use of fabrication equipment. Please consult your own lawyers and subject matter experts if you are looking to develop your own safety curriculum for fabrication equipment operation. Tool operators are responsible for their own safety, including reading and understanding the owners manual for this equipment and all of the warnings it contains.


Contents

Personal Protective Equipment

  • Standard shop personal protective equipment (safety glasses, no long hair, no flowing clothes, etc.) are required


Safe Operation

  • Clamp materials or make sure they are secure before cutting to prevent excessive vibration
  • Rest shoe against material during the cut. Adjust the shoe length if necessary to keep the blade engaged
  • Angle the saw blade slightly so that the portion of blade closest to the saw contacts the material first
  • Keep both hands on the saw, and neither hand on or behind the workpiece
  • Use appropriate blade for the cutting operation. Blade should be the correct type for the material being cut, should extend beyond the material cut at the saw’s shortest stroke, and have at least 3 teeth in the material at all times
  • Start saw before making contact with the material
  • Keep the saw safety engaged whenever the saw is not cutting
  • Install blades by lifting the blade lock lever, fully inserting the blade, and lowering the blade lock lever. Test the new blade before a cut by pulling and pushing on it to make sure it is secure


Common Maintenance Operations

  • Store the saw without a blade and with the safety on (if available)


Allowable Materials

  • Blade should be selected according to the material being cut.
  • There are no material restrictions for the saw itself

Pages in category "Reciprocating Saws"

This category contains only the following page.

R

Personal tools
Wiki Maintenance