Epilog Legend Zelda

From Artisan's Asylum

(Redirected from Epilog Legend)
Jump to: navigation, search
Tools Formerly at the Asylum.
Epilog Legend 'Zelda'
Laser Engraver/Cutter

Wrong Epilog lasercutter picture

General Info
MakeEpilog
ModelLegend 36EXT
Serial
Mfr. SpecsUnknown
ManualUser Manual Service Manual
Asylum Info
RubricN/A



Contents

DESCRIPTION

Epilog laser with 36x24 workspace. The Artisan's Asylum no longer has this tool.

MATERIALS THAT CAN BE CUT/ETCHED

Because the wiki often has trouble dealing with long pages with lots of large tables, please consult the separate Materials Cutting Chart (alternative and perhaps better tools for cutting a given material) and Asylasaur_Material_List (materials that laser-cut/etch well or poorly, plus suggested settings) before undertaking a project in a new material.

SETTINGS

Operation Checklist


☐ Turn on Ventilation, Cooling and Air assist systems
☐ Power on laser
☐ Log in to Laser PC as cutter
☐ Open Inkscape
☐ Load image to cut
☐ Confirm document is in Portrait orientation (alter height as needed)
☐ Hit Print, Choose appropriate material
☐ Load material in Laser
☐ Press X/Y Off button and Go button
☐ Move gantry to desired origin and press Set Home button
☐ Press Reset button to confirm home
☐ Press Go button to begin job
☐ Put on safety goggles as appropriate
☐ Watch for fire, errors, headcrash
☐ Note cut time
☐ Allow ventilation (at least 3min for plastics)
☐ Remove work
☐ Power off machine
☐ Power down support systems

Training

Reservations

Use of Zelda should be scheduled via the Asylum reservation system [help].


Media:Introduction_to_Lasercutting.pdf‎

Media:EpilogServiceManual.pdf‎

Personal tools
Wiki Maintenance