FlashForge Creator Pro

From Artisan's Asylum

Jump to: navigation, search
Tools at the Asylum
FlashForge Creator Pro

This a FlashForge Creator Pro

General Info
MakeZZZ
ModelZZZ
SerialN/A
Mfr. Specs
Manualhttp://www.flashforge.com.hk/uploads/5/8/1/9/58196085/flashforge_creator_pro_user_manual_en_version04.29.2015.3.2._latest.pdf
Training (experimental section)
Tool Species3D Printers
(Includes rubric, training information, and testing information.)
Asylum Info
LocationDigital Fabrication
Reservations
OwnerArtisan's Asylum
Operational Status
Latest Status
?'s/Problems
QR Code
3D Printers



Contents

Training

Training is Required for using this machine. Please see the eventbrite page for a list of class dates.

If you have taken the Uprint class in the past this training is free. Email rebecca.knepple@gmail.com to arrange a training.


Usage

To use this printer, you need to make a reservation.

We use Simplify3D as our slicer. You will be taught this in the class.

If you have your own printer, feel free to use Simplify3D for your own printers.

Material (ZZZ) will be provided for you and will be located under the printer.

Cost: $Z.ZZ per gram. Please weight both the model and the support together before taking the support off.

Please do not use this machine until you have been cleared by a digi fab shop volunteer!

Cleaning Requirements

Please detach parts from support material over the trash as not to make a mess.

Recycling Option

If you plan on using the 3D print recycler please put the breakaway supports and any failed prints in the proper container.

Personal tools
Wiki Maintenance