Milling Machine Rubric

From Artisan's Asylum

Jump to: navigation, search
⌊ Student Name
⌊ Instructor Name
Pass ☐
Fail ☐
⌊ Date of Milling Machines test  (m / d / y)
⌊ Instructor Signature

This document is an internal Artisan's Asylum training document and is provided "as is", to be used as a reference only. Use of this document for any purposes other than as reference material (i.e., for the purposes of training and testing users on tools or equipment by other commercial entities or individuals) is not advised. In no event shall the authors of this material, or Artisan's Asylum, Inc., be liable for any claim, damages, or other liability whether in action or contract, arising from, out of, or in connection with the use of the information in this document for training, testing, or on-going safe use of fabrication equipment. Please consult your own lawyers and subject matter experts if you are looking to develop your own safety curriculum for fabrication equipment operation. Tool operators are responsible for their own safety, including reading and understanding the owners manual for this equipment and all of the warnings it contains.

Point out the following tool features


☐ Quill
☐ Table
☐ Vice
☐ X handle
☐ Y handle
☐ Z handle
☐ Table locks
☐ Spindle on/off
☐ Drawbar
☐ Collets

Personal Protective Equipment


☐ Knows whether work gloves can be worn while using the mill
☐ Knows whether rings can be worn while using the mill
☐ Knows whether safety glasses are required while using the mill

Safe Operation


☐ Demonstrates proper work-holding.
☐ Demonstrates milling procedures on a small piece of metal, a small pocket.
☐ Demonstrates a proper tool change.
☐ Demonstrates cleaning the table.

Allowable Materials


☐ Can name three materials allowed on the mill.
☐ Can name three materials that are not allowed on the mill

Personal tools
Wiki Maintenance