Eastwood Powder Gun

From Artisans Asylum Wiki
Revision as of 14:35, 20 May 2024 by Jfbredt (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Link to: Metal Shop main page

Link to: Powder Coating page


Eastwood Dual-Voltage Gun
The smaller of the two systems
General Info
Make Eastwood Hotcoat
Model PCS-250
Serial
Specs
Manual Manual
Asylum Info
Location Metal Shop
Rubric
Training Tool classes
Testing Tool testing, or [[:Category:Metal Shop#Tool Testing

Night|come to the shop on Tool Testing Night]]

Restrictions red


Warning Safety glasses Eye protection required!


Description

Goggle mask.png

The Eastwood gun is the most compact powder-coating tool in the shop. It has a fully-enclosed high-voltage power supply a cable that stretches to the gun, the gun itself, a grounding wire that attaches to the workpiece or the rack that holds it, and an activation switch for the high voltage. Standard jars of powder-coating paint screw onto the gun for easy color change, though the gun must be cleaned after using a particular color.

Shock hazard.png

This tool has a "dual-voltage" feature, allowing the user to switch from 15kV to 25kV depending on the need. The lower setting is used for most applications, especially when spraying the interiors of hollow parts. The higher setting is used when adding a second coat of paint to a part.

Pacemaker warning.png

There is no ON/OFF switch for the power supply. The unit should be unplugged at the orange extension cord at the end of each use. The high voltage is inactive until the activation switch is depressed.

Safety

Link to: Safety notes for Powder Coating

Eastwood power supply
The Eastwood dual-voltage power supply