3D Printer -- Stratasys uPrint SE Plus

From Artisan's Asylum

Revision as of 21:16, 29 March 2014 by DSuds (Talk | contribs)
Jump to: navigation, search
Tools at the Asylum
Stratasys uPrint

Dissolver, printer, and workstation

General Info
MakeStratasys
ModeluPrint SE Plus
SerialN/A
Mfr. Specs
ManualProduct Flyer
Training (experimental section)
Tool SpeciesuPrint 3D Printers
(Includes rubric, training information, and testing information.)
Asylum Info
LocationDigital Fabrication
Reservations
Ownerleased from manufacturer by the Asylum
Operational Status
Latest Status
?'s/Problems
QR Code



Training presentation for reference.

To use this printer, you need to make a reservation.

Due to material waste and maintenance issues we no longer support custom or swapped materials. Once ivory supply is expended all work will be in black.

Do not change the material or support spools until they reach 0%.

Please detach parts from support material over the trash as not to make a mess.

When your job is complete please shut the printer off with the black on/off switch on the right side so the heater is not running constantly.

The bath for dissolving support material has moved to a spot next to the sink at the front wall of building #13.


Consumables

Staple Consumable: Model Material
SpecificationsPart Number(s)Product Link(s)

Cost: N/A

N/A

N/A

N/A

Staple Consumable: Support Material
SpecificationsPart Number(s)Product Link(s)

Cost: N/A

N/A

N/A

N/A

Staple Consumable: Dissolver
SpecificationsPart Number(s)Product Link(s)

Cost: N/A

N/A

N/A

N/A

Personal tools
Wiki Maintenance