User:Jfbredt and Cyclone Sand Blaster: Difference between pages

From Artisans Asylum Wiki
(Difference between pages)
No edit summary
 
No edit summary
 
Line 1: Line 1:
[[Category:Tools]]


{| class="infobox" cellspacing="5" style="width: 2em; text-align: left; font-size: 100%; line-height: 1.5em;"
Link to:  [[:Category:Metal Shop | Metal Shop main page]]
! colspan="2" class="infobox-image" | [[File:jfb_dwg_contrast.png|200px|Jim B drawing]]
 
 
{{ToolBox
  |tool_title        = Sand Blaster
  |tool_subtitle      = Cyclone Manufacturing
  |image              = Metal_shop_sandblaster_action_shot.jpg
  |caption            = A Happy Blaster
  |make              = Cyclone Manufacturing
  |model              = DW-7335
  |serial            = Unknown
  |manufacturer_specs = 
  |manual            =
  |location          = Metal Shop
  |rubric            =
  |training          =[https://www.artisansasylum.com/class-catalog Tool classes]
  |testing            = [https://www.artisansasylum.com/tool-testing Tool testing], or [[:Category:Metal Shop#Tool Testing
Night|come to the shop on Tool Testing Night]]
  |restrictions      = green
  |tool_categories    =
}}
 
{| class="infobox" cellspacing="0" style="width: 2em; text-align: left; font-size: 125%; line-height: 1.5em;"
! colspan="2" class="infobox-image" | [[File:goggle_mask.png|120px| ]]
|-
| colspan="2" | 
|-
|}
 
{| class="infobox" cellspacing="0" style="width: 2em; text-align: left; font-size: 125%; line-height: 1.5em;"
! colspan="2" class="infobox-image" | [[File:_blaster_dust_hazard.png|180px| ]]
|-
| colspan="2" | 
|-
|}
 
{| class="infobox" cellspacing="0" style="width: 2em; text-align: left; font-size: 125%; line-height: 1.5em;"
! colspan="2" class="infobox-image" | [[File:_no_lead_warning.png|180px| ]]
|-
|-
| colspan="2" |  Jim Bredt
| colspan="2" |   
|-
|-
|}
|}


[[Class_Figure_Drawing_Current_Registration]]


{{:LINK_ME}}
{{EyeWarning}}
 
 
=Description=
 
A sand blaster is a machine that mixes abrasive grains with a jet of compressed air and allows the user to abrade the surface of a part, usually metal.  This results in a clean though roughened part free of paint, rust, and other forms of dirt.  For smaller parts the blast gun is contained in a glovebox cabinet sealed off from the outside.  The user manipulates the tool with thick rubber gloves that pass through the wall of the cabinet.
 
The sand blaster cabinet at Artisans Asylum is located in a small room within the Metal Shop on the south wall adjacent to the enclosed loading dock.
 
=Use For=
 
* Steel
* Stainless Steel
* Zinc-coated steel (Galvanized)
* Aluminum, Titanium, Brass
* Painted metal
* Lightly Rusted Parts
 
=Do Not Use For=


Link to: [[Independent Class: Figure Drawing | Main page for the figure drawing class]]
* Lead-based paints
* Asbestos
* Greasy or Oily Parts
* Massively Rusty Parts


Link to: [[Lost Wax Instructors Notes | Lost Wax casting notes 12/2023]]
'''Use a lead-test swab to verify that paint if NOT lead-based!'''


Link to:  [https://calendly.com/jfbredt/tool-testing-plasmatron Tool testing on CNC Plasma Cutter ]
'''If the sandblaster becomes contaminated with lead the media must be disposed as [[TOXIC WASTE]] and the cabinet must be thoroughly cleaned out!'''

Revision as of 13:37, 24 April 2024


Link to: Metal Shop main page



Sand Blaster
A Happy Blaster
General Info
Make Cyclone Manufacturing
Model DW-7335
Serial Unknown
Specs
Manual
Asylum Info
Location Metal Shop
Rubric
Training Tool classes
Testing Tool testing, or [[:Category:Metal Shop#Tool Testing

Night|come to the shop on Tool Testing Night]]

Restrictions green


Goggle mask.png
Blaster dust hazard.png
No lead warning.png


Warning Safety glasses Eye protection required!



Description

A sand blaster is a machine that mixes abrasive grains with a jet of compressed air and allows the user to abrade the surface of a part, usually metal. This results in a clean though roughened part free of paint, rust, and other forms of dirt. For smaller parts the blast gun is contained in a glovebox cabinet sealed off from the outside. The user manipulates the tool with thick rubber gloves that pass through the wall of the cabinet.

The sand blaster cabinet at Artisans Asylum is located in a small room within the Metal Shop on the south wall adjacent to the enclosed loading dock.

Use For

  • Steel
  • Stainless Steel
  • Zinc-coated steel (Galvanized)
  • Aluminum, Titanium, Brass
  • Painted metal
  • Lightly Rusted Parts

Do Not Use For

  • Lead-based paints
  • Asbestos
  • Greasy or Oily Parts
  • Massively Rusty Parts

Use a lead-test swab to verify that paint if NOT lead-based!

If the sandblaster becomes contaminated with lead the media must be disposed as TOXIC WASTE and the cabinet must be thoroughly cleaned out!

Retrieved from "http://wiki.artisansasylum.com/index.php?title=User:Jfbredt&oldid=3540"