Asylasaur

From Artisan's Asylum

(Difference between revisions)
Jump to: navigation, search
(Update for new rate and first pass at instructions update for new software)
 
(3 intermediate revisions not shown)
Line 1: Line 1:
-
{{ToolBox
+
{{ToolBox-Gone
|tool_title        = Asylasaur
|tool_title        = Asylasaur
|tool_subtitle      = Large Format Laser Cutter
|tool_subtitle      = Large Format Laser Cutter
Line 32: Line 32:
{{Cb}}  - Asylasaur control should be on the first tab
{{Cb}}  - Asylasaur control should be on the first tab
{{Cb}}  - Use username "laser" password "laser" if prompted
{{Cb}}  - Use username "laser" password "laser" if prompted
-
{{Cb}} Click open button to load file
+
{{Cb}} - Click "Open" button to load file
{{Cb}}  - Confirm size is accurate!
{{Cb}}  - Confirm size is accurate!
-
{{Cb}} In Move/jog tab set up cut area
+
{{Cb}}  - Avoid hitting outside limits of bed
-
{{Cb}}  - Move to far left with arrows if needed
+
{{Cb}}  - Hit house icon to move to home (0,0)
-
{{Cb}}  - Hit house icon to configure home
+
{{Cb}}  - Click the "Reset Offset" button which appears after having clicked the "Offset" button.
-
{{Cb}}  - Clear any offset by clicking outside of offset area
+
{{Cb}}  - Click the "Offset" button to select the new offset (0,0) by then clicking a preffered location on the laser bed area.
-
{{Cb}}  - Click or use arrow keys to move to top left corner of work piece
+
{{Cb}}  - Wait 2 seconds, click the "Move" button to the origin of the offset.
-
{{Cb}}  - Wait 2 seconds, click Move To and Set Offset buttons
+
{{Cb}} - Click the "Open" button and select file.
-
{{Cb}} In Laser jobs tab configure job
+
{{Cb}}  - Set passes, speed, power and colors for your job using the buttons that appear on the right side of the screen.
-
{{Cb}}  - Set passes, speed, power and colors for your job
+
{{Cb}}  - Confirm placement with "Bounding Box" button (next to Run)
-
{{Cb}}  - Confirm placement with Send Bounding Box Button (next to Send)
+
{{Cb}} Put on safety goggles as appropriate
{{Cb}} Put on safety goggles as appropriate
-
{{Cb}} Send to Asylasaur
+
{{Cb}} Send to Asylasaur by clicking the "Run" button
{{Cb}} Watch for fire, errors, missing or misdirected laser, head crash
{{Cb}} Watch for fire, errors, missing or misdirected laser, head crash
{{Cb}} Record your usage via the web page [https://artisansasylum.com/report-tool-use/ https://artisansasylum.com/report-tool-use/]
{{Cb}} Record your usage via the web page [https://artisansasylum.com/report-tool-use/ https://artisansasylum.com/report-tool-use/]
-
{{Cb}} For additional cuts repeat from clearing and setting offset
+
{{Cb}}  - Clear any offset by clicking the "Offset" button and then clicking the newly appeared "Reset Offset" button
-
{{Cb}} In Move/jog tab reset laser
+
{{Cb}}  - Hit the House button to move lens home
-
{{Cb}}  - Clear any offset by clicking outside of offset area
+
-
{{Cb}}  - Hit 0,0 button (or 0 on the keyboard) to move lens home
+
{{Cb}} Log off machine (Menu from top right corner of screen)
{{Cb}} Log off machine (Menu from top right corner of screen)
{{Cb}} Allow ventilation (at least 3 min after plastics)
{{Cb}} Allow ventilation (at least 3 min after plastics)
Line 64: Line 61:
Solution: Remember to turn off the emergency stop.  
Solution: Remember to turn off the emergency stop.  
Also try resetting the firmware: on the lasersaur app, at the top left, under Admin, click Reset Atmega (restarts firmware).
Also try resetting the firmware: on the lasersaur app, at the top left, under Admin, click Reset Atmega (restarts firmware).
-
 
-
 
-
Problem: Error flag "rejecting, outside work area" when sending the job or bounding box.
 
-
 
-
Solution: If your job is an inkscape .svg file, you may have lines outside the defined page. Make sure no lines cross over the page border, and zoom out to check that you have no images fully outside the page.
 
=Asylasaur Training=
=Asylasaur Training=
Asylasaur training is covered in the Asylum Laser Cutter Training class.  Class attendance is required to offset the machine lease and testing expenses as well as ensuring everyone has been informed of all safety policies and the expectation that they contribute to the group knowledge base.
Asylasaur training is covered in the Asylum Laser Cutter Training class.  Class attendance is required to offset the machine lease and testing expenses as well as ensuring everyone has been informed of all safety policies and the expectation that they contribute to the group knowledge base.
-
[[Media:Asylasaur Training.pdf]]
+
[[File:Lasorz 2017.pdf]]
=Asylasaur User Maintenance=
=Asylasaur User Maintenance=

Current revision as of 09:30, 9 August 2018

Tools Formerly at the Asylum.
Asylasaur
Large Format Laser Cutter

Picture of generic Lasersaur

General Info
MakeLasersaur
Model14.01
Serial007
Mfr. SpecsUnknown
ManualProject Lasersaur manual
Asylum Info
RubricN/A



The Asylasaur is the Asylum's version of the Lasersaur Laser cutter. It has a 100W CO2 laser and a 1220x610mm (48x24") cutting bed. There is a $2.50/5 min usage fee billed in 5 minute increments. An invoice will be emailed to you. Email member-services@ with any questions.

Contents

Laser Appropriate Materials

Many materials are unable, unsafe or unpleasant to use in the laser cutter. Reference the Asylasaur Material List for a list of materials that laser-cut/etch well or poorly, plus suggested settings. PLEASE CONTRIBUTE TO THE LIST! For a more general list of how to cut various materials with Asylum tools you can reference this page: Materials Cutting Chart.

Asylasaur Operation Checklist


☐ Turn on Ventilation, Cooling and Air assist systems
☐ - Confirm you can feel the air pulled into the vent
☐ - The cross lasers will light up when air pressure is ready
☐ Disengage eStop switch with clockwise twist
☐ Load material in Laser
☐ Set focal depth - adjust as needed using Focusing tool
☐ Log in to Laser PC as user 'cutter' if needed
☐ Open Firefox
☐ - Asylasaur control should be on the first tab
☐ - Use username "laser" password "laser" if prompted
☐ - Click "Open" button to load file
☐ - Confirm size is accurate!
☐ - Avoid hitting outside limits of bed
☐ - Hit house icon to move to home (0,0)
☐ - Click the "Reset Offset" button which appears after having clicked the "Offset" button.
☐ - Click the "Offset" button to select the new offset (0,0) by then clicking a preffered location on the laser bed area.
☐ - Wait 2 seconds, click the "Move" button to the origin of the offset.
☐ - Click the "Open" button and select file.
☐ - Set passes, speed, power and colors for your job using the buttons that appear on the right side of the screen.
☐ - Confirm placement with "Bounding Box" button (next to Run)
☐ Put on safety goggles as appropriate
☐ Send to Asylasaur by clicking the "Run" button
☐ Watch for fire, errors, missing or misdirected laser, head crash
☐ Record your usage via the web page https://artisansasylum.com/report-tool-use/
☐ - Clear any offset by clicking the "Offset" button and then clicking the newly appeared "Reset Offset" button
☐ - Hit the House button to move lens home
☐ Log off machine (Menu from top right corner of screen)
☐ Allow ventilation (at least 3 min after plastics)
☐ Hit eStop
☐ Remove work, clean bed
☐ Remove cut bed and vacuum if needed
☐ Power down support systems

Troubleshooting

Problem: Head does not respond to commands from the app.

Solution: Remember to turn off the emergency stop. Also try resetting the firmware: on the lasersaur app, at the top left, under Admin, click Reset Atmega (restarts firmware).

Asylasaur Training

Asylasaur training is covered in the Asylum Laser Cutter Training class. Class attendance is required to offset the machine lease and testing expenses as well as ensuring everyone has been informed of all safety policies and the expectation that they contribute to the group knowledge base.

File:Lasorz 2017.pdf

Asylasaur User Maintenance

Most maintenance tasks for the laser such as lens cleaning, belt adjustment, mirror alignment etc. will be handled by the testers and trainers, and documented here. There are other tasks that may come up that ambitious users can undertake however.

Correcting Crosshair Lasers

  • Etch a horizontal and vertical line crossing on a piece of paper
  • Move the laser to the crossing point
  • Place finger under one line laser to block it and adjust the other to go through the intersection evenly
  • Repeat for other line

Resetting Asylasaur

After jobs are interrupted or other unusual events the laser may be in an odd state where the laser may not fire or air assist may not turn off or on. If the web page is still responsive you can reset the system with the following steps

  • Clear any offset
  • Choose 'Reset Atmega' from the Admin menu at the top of the interface
  • Click the house icon to re-home the system

Checking Y Gantry Alignment

If you believe the belt on one side or the other has skipped, you can perform the following test/fix steps.

  • Home the machine
  • Hit the emergency stop button and wait 15 seconds
  • Push the gantry to the back of the machine. It should make contact with metal stops on both sides.
  • If one side is not touching the gantry is out of alignment
  • Open a ticket on the machine. If you are able to fix the problem (see below) just open a warning. Otherwise mark the machine as down.

Correcting Y Gantry Alignment

  • Move the gantry to the back as noted in the Checking steps above.
  • On the side that is not making contact push the gantry back along the rail until it the belt jumps a gear and the gantry makes contact with the back stop. Try not to place any twisting force on the gantry and only push straight back along the side rail.
  • If gantry moves enough to feel the belt slip a tooth and you may hear a click. Both sides should now contact the back plates at the same time when the gantry is pushed.
  • Disable the eStop and home the machine.
  • Perform a sample test cut piece of paper near the left side of the bed to check the laser.
  • Repeat the test on the right side to compare the results. Check the mirror mount for heating.

Asylasaur Reservations

Use of the Asylasaur should be scheduled via the Asylum reservation system [help].

Personal tools
Wiki Maintenance