Bridgeport Manual Milling Machine

From Artisans Asylum Wiki
Revision as of 11:02, 12 March 2024 by Jfbredt (talk | contribs) (Created page with "Category:ToolsCategory:Milling Machines Link to: Machine Shop Main Page {{EyeWarning}} {{ToolBox |tool_title = Bridgeport Milling Machine |tool_subtitle = Bridgeport Milling Machine |image = Mill_Bridgeport_new.png |caption = The Bridgeport mill in the Asylum Machine Shop |make = Bridgeport |model = |serial = |manufacturer_specs = |manu...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

Link to: Machine Shop Main Page

Warning Safety glasses Eye protection required!



Bridgeport Milling Machine
The Bridgeport mill in the Asylum Machine Shop
General Info
Make Bridgeport
Model
Serial
Specs
Manual
Asylum Info
Location Machine Shop
Rubric N/A
Training
Testing Tool testing
Restrictions red

See the Milling Machines category for notes on using all 3-Axis Milling Machines


Safety

Link to: Safety notes on the Milling Machine Category page

Speed Adjustment

Tortoise and hare
The speed control on the Bridgeport mill.

The spindle speed is adjusted manually with the crank on the right-hand face of the headstock. Only adjust the spindle speed when the spindle is turning!' '

This machine has a reversible motor drive on the long axis of the table. Feeding in this direction can be done manually or with under power from the motor.

Manual Draw-Bar

This machine has manual tool-changing with a wrench.