Category:Drill Presses: Difference between revisions

From Artisans Asylum Wiki
No edit summary
No edit summary
Line 34: Line 34:


Graphite
Graphite
Regular and irregular shapes


==Do Not Use For==
==Do Not Use For==


Thin sheets
Thin sheets
Parts too big to be lifted onto the table


Ceramics or other abrasive materials
Ceramics or other abrasive materials


Material that is unsuitable to the shop where the tool is located.
Material that is unsuitable to the shop where the tool is located.

Revision as of 19:59, 18 February 2024



Drill Press
Four drill presses in the Wood Shop
General Info
Make various
Model
Serial
Specs
Manual
Asylum Info
Location Wood Shop
Rubric
Training
Testing
Restrictions red


Description

A drill press is a free-standing power tool with a vertical sliding spindle that carries a chuck for drilling. The spindle, or "quill" is moved up and down manually by a wheel or handle to the side. The workpiece is supported by a horizontal table with adjustable height. Workpieces are clamped down to the table or held in a vise while they are drilled to varying diameters, generally ranging from 1/16" up to 3/4".

Use For (Depending on Location)

Wood

Metal

Plastic

Composites

Graphite

Regular and irregular shapes

Do Not Use For

Thin sheets

Parts too big to be lifted onto the table

Ceramics or other abrasive materials

Material that is unsuitable to the shop where the tool is located.

Pages in category "Drill Presses"

The following 6 pages are in this category, out of 6 total.