Category:Multipurpose Room

From Artisan's Asylum

Revision as of 10:38, 28 November 2016 by Christempleman (Talk | contribs)
Jump to: navigation, search
Active Craft Areas
Multipurpose room (Computer Lab & Design Center)

Empty

General Info
Shop Colors
Shop Rules
Managed By Chris Templeman
HoursSame as membership hours
Operational Status of Tools
Tool Maintenence Tickets


Contents

What's in the room?

Lots of different things hang out in the classroom:

Kitchenette

  • Tea & coffee are member-stocked in MPR1.
  • The shelves and cuppoards are not a pantry. No food (except Tea and Coffee) is to be stored.
  • Anything you leave out in the kitchen area will be considered common, including your dishes.
  • Treat this space like a shared kitchen with lots of roommates: it is expected that you clean your dishes immediately.

Cleanup

You are responsible for washing any dishes you use. We do not have any janitors. This is a member maintained facility. You may leave them in the drying rack. Please do not leave messes on any table when you're done.

Fridge Etiquette

We have two refrigerators in the Multipurpose Room 1. It is up to you to put your name and the date on your food (including frozen food).

  • Unlabeled (food without a Name AND Date), stinky or food older than 2 weeks will be thrown away.

Trash and Recycling

  • We generate a lot of waste. We rely on volunteers to take out the trash. Please help out.
  • The waste disposal page has detailed information
  • Trash Map

Janitorial Closet

  • Soap, trash liners, cleaning supplies & mops are stored in this closet.

Sinks

There are two sinks in the room:

This slopsink consists of a faucet at chest-height and drain in the floor. This is an excellent place to dispose of materials that are not safe near food areas. Note that such materials must still be ones that are both safe and legal to pour down a drain! Anything corrosive, hazmat, etc must be handled appropriately. There is also one sink very nearby:

Projector

You can hook the projector to one of the classroom machines, or to your own laptop. If you're planning to use your own machine, please drop by well before your presentation and ensure that your laptop and the projector will get along. In particular, many Mac laptops require special converters, and you can't just assume that we'll have the right one, or that it hasn't wandered off. Please bring your own, and please test in advance. Nothing kills a presentation faster than watching someone struggle with a projector.

Electrical circuits

The back and side walls of the classroom side of the room have a string of quad-box outlets on them. Every pair of quads is a separate circuit. (In other words, there are 8 outlets per circuit.)


If you rearrange the room please return the room to the default configuration for teaching (3 rows of desks).

We have a computer lab in the Multipurpose Room, consisting of ten identical computers in roll-around desks available for use by instructors, their students, and our members.

If you need to talk to us about particular CPUs, their names are the ten metallic elements from 24 to 33 in the periodic table: chromium, manganese, iron, cobalt, nickel, copper, zinc, gallium, germanium, and arsenic (Cr Mn Fe Co Ni Cu Zn Ga Ge As). Each CPU is labeled on the front with its name.

Computers

Computers are for members, day pass users and students. Guests should not use the computers.

Your use of these computers means that you also agree to these policies at a minimum:

Hardware

Each CPU consists of a quad-core 64-bit AMD 4100FX, in a Gigabyte GA-970A-UD3 motherboard, with 8GB DDR3 RAM, and an nVidia GT216GL (Quadro 400) graphics card. The motherboard will accomodate up to 32GB of RAM, if that turns out to be necessary. Each machine also has 160GB of disk, shared across various partitions and operating systems.

We have Windows 7 Home Premium 64-bit installed

Each computer has USB ports on the front and back panels. Most are USB 2.0 (red connectors), but two on the back panel are USB 3.0 (blue connectors).

If you're using these computers for hardware development, please be careful. If you're rolling your own USB hardware and there's any chance of miswiring your USB connectors or having unusual voltages on them, use a USB hub between your device and the computers!

Storing files

In general, do not assume anything you leave on the machine will survive.

If you need to store files, you have two choices:

  • Use your own local storage, such as a flash drive or USB external disk.
  • Use our public file share, which is available to all members over the network.

Installed software

This section documents the software currently installed on the machines. If you'd like something installed, please email it[at]artisansasylum[dot]com


We have Windows 7 Home Premium 64-bit installed. The packages below are what we've installed on all machines that aren't there by default out of the box.

Audio/Video/DJing CAD/CAM General Productivity Graphics Other
  • Ableton Live
  • Mixxx 1.11.0-alpha2
  • PureData 0.42.5
  • ASIO4ALL 2.10 [low-latency audio driver]
  • Electrical
    • PCB design & schematic capture
      • FreePCB
      • TinyCAD
    • Hardware programmers and IDEs
      • Arduino 1.0
      • Cypress PSOC (Creator, Designer, and Programmer)
      • Fritzing
      • MATLAB (Image Processing Toolbox, Computer Vision System Toolbox, Control System Toolbox, Instrument Control Toolbox)
      • Simulink (Stateflow, Simulink Control Design, System Identification Toolbox)
  • Mechanical
  • BullZip PDF Creator
  • Firefox
  • LibreOffice
  • Inkscape
  • Cygwin 1.7.16-1
  • Processing
  • Wacom tablet driver 6.3.2-3

Media in category "Multipurpose Room"

The following 2 files are in this category, out of 2 total.

Personal tools
Wiki Maintenance