Drill Press Dayton 3Z918D

From Artisans Asylum Wiki
Revision as of 17:29, 20 February 2024 by Jfbredt (talk | contribs)



Dayton Drill Press
The Dayton free-standing drill press
General Info
Make Dayton
Model 3Z918D
Serial Unknown
Specs
Manual Manual for a similar Dayton drill press
Asylum Info
Location Wood Shop
Rubric
Training
Testing
Restrictions red

See the Drill Presses category for notes on using all Drill Presses


Changin the spindle speed

  • Make sure the machine is unplugged before adjusting the pulleys.
  • The tension lock lever is located just in front of the motor on the right side.
  • A table of belt configurations is located inside the cover.
Daton speed change
The drive train of the Dayton drill press.