Drill Press Delta Bench 11-990: Difference between revisions

From Artisans Asylum Wiki
No edit summary
No edit summary
Line 18: Line 18:
   |tool_categories    = [[:Category:Drill Presses|See the Drill Presses category for notes on using all Drill Presses]]
   |tool_categories    = [[:Category:Drill Presses|See the Drill Presses category for notes on using all Drill Presses]]
}}
}}
''Changing the Spindle Speed'''
1.  Unplug the machine.
2.  Lift up the belt and pulley guard (A).
3.  Loosen the tension lock knob (B) and pivot the motor forward.
4.  Move the belt (C) to the desired position on the two pulleys. 
5.  Push the motor back to tension the belt and tighten the lock knob.
6.  Correct tension is when the belt can be flexed about 1" with light pressure.





Revision as of 19:27, 19 February 2024



Delta Benchtop Drill Press
File:Wood shop drill press delta small.png
The Delta bench-top drill press
General Info
Make Delta
Model 11-990
Serial Unknown
Specs
Manual Delta 11-990 manual
Asylum Info
Location Wood Shop
Rubric
Training
Testing
Restrictions red

See the Drill Presses category for notes on using all Drill Presses


Changing the Spindle Speed'

1. Unplug the machine.

2. Lift up the belt and pulley guard (A).

3. Loosen the tension lock knob (B) and pivot the motor forward.

4. Move the belt (C) to the desired position on the two pulleys.

5. Push the motor back to tension the belt and tighten the lock knob.

6. Correct tension is when the belt can be flexed about 1" with light pressure.


11-990 speed change
Changing the spindle speed on the Delta benchtop drill press.