Drill Press Delta Bench 11-990
From Artisans Asylum Wiki
| Delta Benchtop Drill Press | |
|---|---|
File:Wood shop drill press delta small.png The Delta bench-top drill press | |
| General Info | |
| Make | Delta |
| Model | 11-990 |
| Serial | Unknown |
| Specs | |
| Manual | Delta 11-990 manual |
| Asylum Info | |
| Location | Wood Shop |
| Rubric | |
| Training | |
| Testing | |
| Restrictions | red |
See the Drill Presses category for notes on using all Drill Presses
Changing the Spindle Speed'
1. Unplug the machine.
2. Lift up the belt and pulley guard (A).
3. Loosen the tension lock knob (B) and pivot the motor forward.
4. Move the belt (C) to the desired position on the two pulleys.
5. Push the motor back to tension the belt and tighten the lock knob.
6. Correct tension is when the belt can be flexed about 1" with light pressure.
| |
|---|---|
| Changing the spindle speed on the Delta benchtop drill press. |
