Drill Press Rikon Radial 30-250: Difference between revisions

From Artisans Asylum Wiki
No edit summary
No edit summary
Line 1: Line 1:
[[Category:Tools]][[Category:Wood Shop]][[Category:Drill Presses]]
[[Category:Tools]]
Link to:  [[:Category:Wood Shop | Wood Shop main page]]
[[Category:Drill Presses]]


{{ToolBox
{{ToolBox
Line 18: Line 20:
   |tool_categories    = [[:Category:Drill Presses|See the Drill Presses category for notes on using all Drill Presses]]
   |tool_categories    = [[:Category:Drill Presses|See the Drill Presses category for notes on using all Drill Presses]]
}}
}}
==Safety==
Link to:  [https://wiki.artisansasylum.com/wiki/Category:Drill_Presses#Safety_Notes Safety notes on the Drill Presses category page]


'''This is a "radial" drill press.'''
'''This is a "radial" drill press.'''

Revision as of 21:44, 4 March 2024

Link to: Wood Shop main page


Rikon Drill Press
The Rikon radial drill press
General Info
Make Rikon
Model 30-250
Serial Unknown
Specs
Manual Rikon 30-250 manual
Asylum Info
Location Wood Shop
Rubric
Training
Testing
Restrictions red

See the Drill Presses category for notes on using all Drill Presses


Safety

Link to: Safety notes on the Drill Presses category page

This is a "radial" drill press.

This machine is held together by a set of cylindrical clamps on various posts that form the machine structure.

This property allows the user to tilt and reposition the drill press head and the table, if desired.

Please refer to the Rikon 30-250 manual for more detail on how to make these adjustments.

To change the spindle speed

1. Unplug the machine.

2. Open the belt cover.

3. Loosen the belt tension lock (A) and pull forward on the motor (B).

4. Choose the desired speed from the chart on the inside of the cover.

5. Shift the belt on the pulleys to the desired configuration.

6. Push back on the motor to tension the belt.

7. Tighten the belt tension handle.

Rikon speed adj
Changing the spindle speed on the Rikon drill press.
Rikon pulleys
The belt and pulleys on the Rikon drill press