Drill Press Walker Turner: Difference between revisions

From Artisans Asylum Wiki
No edit summary
No edit summary
 
(6 intermediate revisions by the same user not shown)
Line 1: Line 1:
[[Category:Tools]][[Category:Metal Shop]][[Category:Machine Shop]][[Category:Drill Presses]]
[[Category:Tools]][[Category:Machine Shop]][[Category:Drill Presses]]
Link to: [[:Category:Machine Shop | Machine Shop main page]]


{{ToolBox
{{ToolBox
Line 19: Line 20:
}}
}}


'''The aptly-named Walker-Turner''' is mounted on a circular wooden base.  By setting up an oscillation in the machine, it is very easy to walk around the shop or turn it in any direction.
{{EyeWarning}}


  Care should be taken when using this tool.
'''The aptly-named Walker-Turner''' is mounted on a circular wooden base.  By setting up an oscillation between the machine and the floor, it is very easy to walk around the shop and turn in any direction.
 
{{Warning | text=Care should be taken when using this tool.}}

Latest revision as of 13:12, 15 March 2024

Link to: Machine Shop main page


Walker-Turner Drill Press
The Walker-Turner
General Info
Make Walker-Turner
Model Antique, ca. 1940's
Serial Unknown
Specs
Manual None
Asylum Info
Location Machine Shop
Rubric
Training
Testing
Restrictions red

See the Drill Presses category for notes on using all Drill Presses


Warning Safety glasses Eye protection required!


The aptly-named Walker-Turner is mounted on a circular wooden base. By setting up an oscillation between the machine and the floor, it is very easy to walk around the shop and turn in any direction.

Warning Care should be taken when using this tool.