Drill Press Walker Turner: Difference between revisions

From Artisans Asylum Wiki
No edit summary
No edit summary
Line 1: Line 1:
[[Category:Tools]][[Category:Metal Shop]][[Category:Machine Shop]][[Category:Drill Presses]]
[[Category:Tools]][[Category:Machine Shop]][[Category:Drill Presses]]


{{ToolBox
{{ToolBox
Line 19: Line 19:
}}
}}


'''The aptly-named Walker-Turner''' is mounted on a circular wooden base.  By setting up an oscillation between the machine and the floor, it is very easy to walk it around the shop or turn it in any direction.
'''The aptly-named Walker-Turner''' is mounted on a circular wooden base.  By setting up an oscillation between the machine and the floor, it is very easy to walk it around the shop and turn it in any direction.


   Care should be taken when using this tool.
   Care should be taken when using this tool.

Revision as of 18:03, 20 February 2024



Walker-Turner Drill Press
The Walker-Turner
General Info
Make Walker-Turner
Model Antique, ca. 1940's
Serial Unknown
Specs
Manual None
Asylum Info
Location Machine Shop
Rubric
Training
Testing
Restrictions red

See the Drill Presses category for notes on using all Drill Presses


The aptly-named Walker-Turner is mounted on a circular wooden base. By setting up an oscillation between the machine and the floor, it is very easy to walk it around the shop and turn it in any direction.

  Care should be taken when using this tool.