Enco Manual Milling Machine

Link to: Machine Shop Main Page

		Eye protection required!

Enco Manual Mill
The ENCO mill in the Asylum Machine Shop
General Info
Make	Enco
Model
Serial
Specs
Manual	User Manual
Asylum Info
Location	Machine Shop
Rubric	N/A
Training
Testing	Tool testing
Restrictions	red

See the Milling Machines category for notes on using all 3-Axis Milling Machines

Safety

Link to: Safety notes on the Milling Machine Category page

Digtal Read-Out

The digital read-out (DRO) on the Enco mill.

This milling machine is equipped with a digital read-out that displays the position of the table in 0.001 inch increments. This eases the machining process greatly.

Speed Adjustment

The spindle speed is adjusted manually with the crank on the right-hand face of the headstock. Only adjust the spindle speed when the spindle is turning!' '

This machine has a reversible motor drive on the long axis of the table. Feeding in this direction can be done manually or with under power from the motor.

Manual Draw-Bar

This machine has manual tool-changing with a wrench.