Enco Manual Milling Machine: Difference between revisions
From Artisans Asylum Wiki
No edit summary |
|||
| Line 28: | Line 28: | ||
|} | |} | ||
This milling machine | This milling machine is equipped with a digital read-out that displays the position of the table in 0.001 inch increments. This eases the machining process greatly. | ||
==Speed Adjustment== | ==Speed Adjustment== | ||
The spindle speed | The spindle speed is adjusted manually with the crank on the right-hand face of the headstock. '''Only adjust the spindle speed when the spindle is turning!'''' | ||
' | |||
This machine has a reversible motor drive on the long axis of the table. Feeding in this direction can be done manually or with under power from the motor. | |||
==Manual Draw-Bar== | ==Manual Draw-Bar== | ||
This machine has manual tool-changing with a wrench. | This machine has manual tool-changing with a wrench. | ||
Revision as of 21:02, 4 March 2024
Link to: Machine Shop Main Page
| Enco Manual Mill | |
|---|---|
| General Info | |
| Make | Enco |
| Model | |
| Serial | |
| Specs | |
| Manual | User Manual |
| Asylum Info | |
| Location | Machine Shop |
| Rubric | N/A |
| Training | |
| Testing | Tool testing |
| Restrictions | red |
See the Milling Machines category for notes on using all 3-Axis Milling Machines
Digtal Read-Out
| |
|---|---|
| The digital read-out (DRO) on the Enco mill. |
This milling machine is equipped with a digital read-out that displays the position of the table in 0.001 inch increments. This eases the machining process greatly.
Speed Adjustment
The spindle speed is adjusted manually with the crank on the right-hand face of the headstock. Only adjust the spindle speed when the spindle is turning!' '
This machine has a reversible motor drive on the long axis of the table. Feeding in this direction can be done manually or with under power from the motor.
Manual Draw-Bar
This machine has manual tool-changing with a wrench.
