Enco Manual Milling Machine

From Artisans Asylum Wiki
Revision as of 21:23, 3 March 2024 by Jfbredt (talk | contribs)

Link to: Machine Shop Main Page


Enco Manual Mill
The ENCO mill in the Asylum Machine Shop
General Info
Make Enco
Model
Serial
Specs
Manual User Manual
Asylum Info
Location Machine Shop
Rubric N/A
Training
Testing Tool testing
Restrictions red

See the Milling Machines category for notes on using all 3-Axis Milling Machines


Digtal Read-Out - DRO

ENCO DRO
The digital read-out (DRO) on the Enco mill.

This milling machine is strictly manual but it is equipped with a digital read-out that displays the position of the table in 0.001 inch increments. This eases the machining process greatly.

Speed Adjustment

The spindle speed in adjusted manually with the crank on the right-hand face of the headstock. Only adjust the spindle speed when the spindle is turning!

Manual Draw-bar

This machine has manual tool-changing with a wrench.