Enco Manual Milling Machine

From Artisans Asylum Wiki

Link to: Machine Shop Main Page

Warning Safety glasses Eye protection required!



Enco Manual Mill
The ENCO mill in the Asylum Machine Shop
General Info
Make Enco
Model
Serial
Specs
Manual User Manual
Asylum Info
Location Machine Shop
Rubric N/A
Training
Testing Tool testing
Restrictions red

See the Milling Machines category for notes on using all 3-Axis Milling Machines


Safety

Link to:Milling machine safety notes on the Category page

Digtal Read-Out

ENCO DRO
The digital read-out (DRO) on the Enco mill.

This milling machine is equipped with a digital read-out that displays the position of the table in 0.001 inch increments. This eases the machining process greatly.

Speed Adjustment

The spindle speed is adjusted manually with the crank on the right-hand face of the headstock. Only adjust the spindle speed when the spindle is turning!' '

This machine has a reversible motor drive on the long axis of the table. Feeding in this direction can be done manually or with under power from the motor.

Manual Draw-Bar

This machine has manual tool-changing with a wrench.