Epilog Helix

From Artisan's Asylum

(Difference between revisions)
Jump to: navigation, search
DSuds (Talk | contribs)
(Created page with '{{ToolBox |tool_title = Epilog Helix |tool_subtitle = Laser Engraver/Cutter |image = Asylasaur-old.jpg |caption = Picture of some other Laser…')
Newer edit →

Revision as of 16:55, 9 July 2014

Tools at the Asylum
Epilog Helix
Laser Engraver/Cutter

Picture of some other Laser

General Info
ModelHelix 50
Mfr. Specs
Training (experimental section)
Tool SpeciesLaser Cutters
(Includes rubric, training information, and testing information.)
Asylum Info
LocationDigital Fabrication
OwnerBill Morris
Operational Status
Latest Status
QR Code


Epilog Helix 50 laser with 24x18 workspace.


Because the wiki often has trouble dealing with long pages with lots of large tables, please consult the separate Materials Cutting Chart (alternative and perhaps better tools for cutting a given material) and Asylasaur_Material_List (materials that laser-cut/etch well or poorly, plus suggested settings) before undertaking a project in a new material.

Operation Checklist

☐ Turn on Ventilation, Cooling and Air assist systems
☐ Power on laser
☐ Log in to Laser PC as cutter
☐ Open Inkscape
☐ Load image to cut
☐ Confirm document is in Portrait orientation (alter height as needed)
☐ Hit Print, Choose appropriate material
☐ Load material in Laser
☐ Press X/Y Off button and Go button
☐ Move gantry to desired origin and press Set Home button
☐ Press Reset button to confirm home
☐ Press Go button to begin job
☐ Put on safety goggles as appropriate
☐ Watch for fire, errors, headcrash
☐ Note cut time
☐ Allow ventilation (at least 3min for plastics)
☐ Remove work
☐ Power off machine
☐ Power down support systems

Personal tools
Wiki Maintenance