Epilog Legend Zelda
From Artisan's Asylum
(Created page with '{{ToolBox |tool_title = Epilog Legend 'Zelda' |tool_subtitle = Laser Engraver/Cutter |image = Helix lasercutter.jpg |caption = Wrong Epilog l…') |
(Retired Zelda) |
||
| (3 intermediate revisions not shown) | |||
| Line 1: | Line 1: | ||
| - | {{ToolBox | + | {{ToolBox-Gone |
|tool_title = Epilog Legend 'Zelda' | |tool_title = Epilog Legend 'Zelda' | ||
|tool_subtitle = Laser Engraver/Cutter | |tool_subtitle = Laser Engraver/Cutter | ||
| Line 7: | Line 7: | ||
|model = Legend 36EXT | |model = Legend 36EXT | ||
|serial = | |serial = | ||
| - | |manufacturer_specs = [http://www.epiloglaser.com/products/legend-laser-series.htm] | + | |manufacturer_specs = [http://www.epiloglaser.com/products/legend-laser-series.htm Epilog web page] |
| - | |manual = | + | |manual = [http://www.epiloglaser.com/downloads/pdf/ext_4.22.10.pdf User Manual] [http://wiki.artisansasylum.com/images/d/dc/EpilogServiceManual.pdf Service Manual] |
|location = Digital Fabrication | |location = Digital Fabrication | ||
|species = Laser Cutters | |species = Laser Cutters | ||
|reservations = {{Asylum Tool Reservation}} | |reservations = {{Asylum Tool Reservation}} | ||
| - | |owner = Mark and Mike | + | |owner = Mark and Mike}} |
=DESCRIPTION= | =DESCRIPTION= | ||
Epilog laser with 36x24 workspace. | Epilog laser with 36x24 workspace. | ||
| + | The Artisan's Asylum no longer has this tool. | ||
=MATERIALS THAT CAN BE CUT/ETCHED= | =MATERIALS THAT CAN BE CUT/ETCHED= | ||
Current revision as of 15:21, 20 February 2017
 Wrong Epilog lasercutter picture | |
| General Info | |
|---|---|
| Make | Epilog |
| Model | Legend 36EXT |
| Serial | |
| Mfr. Specs | Unknown |
| Manual | User Manual Service Manual |
| Asylum Info | |
| Rubric | N/A |
Contents |
DESCRIPTION
Epilog laser with 36x24 workspace. The Artisan's Asylum no longer has this tool.
MATERIALS THAT CAN BE CUT/ETCHED
Because the wiki often has trouble dealing with long pages with lots of large tables, please consult the separate Materials Cutting Chart (alternative and perhaps better tools for cutting a given material) and Asylasaur_Material_List (materials that laser-cut/etch well or poorly, plus suggested settings) before undertaking a project in a new material.
SETTINGS
Operation Checklist
☐ Turn on Ventilation, Cooling and Air assist systems
☐ Power on laser
☐ Log in to Laser PC as cutter
☐ Open Inkscape
☐ Load image to cut
☐ Confirm document is in Portrait orientation (alter height as needed)
☐ Hit Print, Choose appropriate material
☐ Load material in Laser
☐ Press X/Y Off button and Go button
☐ Move gantry to desired origin and press Set Home button
☐ Press Reset button to confirm home
☐ Press Go button to begin job
☐ Put on safety goggles as appropriate
☐ Watch for fire, errors, headcrash
☐ Note cut time
☐ Allow ventilation (at least 3min for plastics)
☐ Remove work
☐ Power off machine
☐ Power down support systems
Training
Reservations
Use of Zelda should be scheduled via the Asylum reservation system [help].
