Epilog Legend Zelda

From Artisan's Asylum

(Difference between revisions)
Jump to: navigation, search
(Created page with '{{ToolBox |tool_title = Epilog Legend 'Zelda' |tool_subtitle = Laser Engraver/Cutter |image = Helix lasercutter.jpg |caption = Wrong Epilog l…')
(It's dangerous to go alone! Read this!)
Line 7: Line 7:
|model              = Legend 36EXT
|model              = Legend 36EXT
|serial            =  
|serial            =  
|manufacturer_specs = [http://www.epiloglaser.com/products/legend-laser-series.htm]
|manufacturer_specs = [http://www.epiloglaser.com/products/legend-laser-series.htm Epilog web page]
|manual            =  
|manual            = [http://www.epiloglaser.com/downloads/pdf/ext_4.22.10.pdf User Manual] [http://wiki.artisansasylum.com/images/d/dc/EpilogServiceManual.pdf Service Manual]
|location          = Digital Fabrication
|location          = Digital Fabrication
|species            = Laser Cutters
|species            = Laser Cutters
|reservations      = {{Asylum Tool Reservation}}
|reservations      = {{Asylum Tool Reservation}}
|owner              = Mark and Mike
|owner              = Mark and Mike}}

Revision as of 19:59, 2 January 2016

Tools at the Asylum
Epilog Legend 'Zelda'
Laser Engraver/Cutter

Wrong Epilog lasercutter picture

General Info
ModelLegend 36EXT
Mfr. Specs
ManualUser Manual Service Manual
Training (experimental section)
Tool SpeciesLaser Cutters
(Includes rubric, training information, and testing information.)
Asylum Info
LocationDigital Fabrication
OwnerMark and Mike
Operational Status
Latest Status
QR Code



Epilog laser with 36x24 workspace.


Because the wiki often has trouble dealing with long pages with lots of large tables, please consult the separate Materials Cutting Chart (alternative and perhaps better tools for cutting a given material) and Asylasaur_Material_List (materials that laser-cut/etch well or poorly, plus suggested settings) before undertaking a project in a new material.


Operation Checklist

☐ Turn on Ventilation, Cooling and Air assist systems
☐ Power on laser
☐ Log in to Laser PC as cutter
☐ Open Inkscape
☐ Load image to cut
☐ Confirm document is in Portrait orientation (alter height as needed)
☐ Hit Print, Choose appropriate material
☐ Load material in Laser
☐ Press X/Y Off button and Go button
☐ Move gantry to desired origin and press Set Home button
☐ Press Reset button to confirm home
☐ Press Go button to begin job
☐ Put on safety goggles as appropriate
☐ Watch for fire, errors, headcrash
☐ Note cut time
☐ Allow ventilation (at least 3min for plastics)
☐ Remove work
☐ Power off machine
☐ Power down support systems



Use of Zelda should be scheduled via the Asylum reservation system [help].



Personal tools
Wiki Maintenance