Epilog Legend Zelda
From Artisan's Asylum
m (moved Epilog Legend to Epilog Legend Zelda) |
JohnHoughton (Talk | contribs) |
||
| Line 16: | Line 16: | ||
=DESCRIPTION= | =DESCRIPTION= | ||
Epilog laser with 36x24 workspace. | Epilog laser with 36x24 workspace. | ||
| + | The Artisan's Asylum no longer has this tool. | ||
=MATERIALS THAT CAN BE CUT/ETCHED= | =MATERIALS THAT CAN BE CUT/ETCHED= | ||
Revision as of 13:35, 27 October 2016
| Epilog Legend 'Zelda' | |
| Laser Engraver/Cutter | |
 Wrong Epilog lasercutter picture | |
| General Info | |
|---|---|
| Make | Epilog |
| Model | Legend 36EXT |
| Serial | |
| Mfr. Specs | |
| Manual | User Manual Service Manual |
| Training (experimental section) | |
| Tool Species | Laser Cutters |
| (Includes rubric, training information, and testing information.) | |
| Asylum Info | |
| Location | Digital Fabrication |
| Reservations | reservation system [help] |
| Owner | Mark and Mike |
| Operational Status | |
| Latest Status |  |
| ?'s/Problems | Maintenance Tickets |
| QR Code | Attach this to the tool |
Contents |
DESCRIPTION
Epilog laser with 36x24 workspace. The Artisan's Asylum no longer has this tool.
MATERIALS THAT CAN BE CUT/ETCHED
Because the wiki often has trouble dealing with long pages with lots of large tables, please consult the separate Materials Cutting Chart (alternative and perhaps better tools for cutting a given material) and Asylasaur_Material_List (materials that laser-cut/etch well or poorly, plus suggested settings) before undertaking a project in a new material.
SETTINGS
Operation Checklist
☐ Turn on Ventilation, Cooling and Air assist systems
☐ Power on laser
☐ Log in to Laser PC as cutter
☐ Open Inkscape
☐ Load image to cut
☐ Confirm document is in Portrait orientation (alter height as needed)
☐ Hit Print, Choose appropriate material
☐ Load material in Laser
☐ Press X/Y Off button and Go button
☐ Move gantry to desired origin and press Set Home button
☐ Press Reset button to confirm home
☐ Press Go button to begin job
☐ Put on safety goggles as appropriate
☐ Watch for fire, errors, headcrash
☐ Note cut time
☐ Allow ventilation (at least 3min for plastics)
☐ Remove work
☐ Power off machine
☐ Power down support systems
Training
Reservations
Use of Zelda should be scheduled via the Asylum reservation system [help].
