Category:Vertical Band Saws -- Wood Cutting: Difference between revisions

From Artisans Asylum Wiki
No edit summary
No edit summary
Line 1: Line 1:
[[Category:Tools]]
[[Category:Tools]][[Category:Band Saws]]


{{ToolBox
{{ToolBox
Line 16: Line 16:
   |testing            =  
   |testing            =  
   |restrictions      =
   |restrictions      =
   |tool_categories    =  
   |tool_categories    = [[Category:Band Saws]]
}}
}}
==Description==
The cutting blade in a band saw is a continuous loop that travels through the machine on pulleys.  In a vertical band saw, the blade travels vertically through a slot in a table, and workpieces are hand-fed through the blade to make a cut.
Wood-grain affects the forces and motions during cutting in a saw, so there are ripping fences and miter gauges as in a table saw.  With metal cutting, the workpiece is usually clamped in a vise.

Revision as of 14:20, 23 February 2024



Wood Cutting Band Saw
Band Saw "Bullwinkle" in the Wood Shop
General Info
Make
Model
Serial
Specs
Manual
Asylum Info
Location [[:Category:|]]
Rubric
Training
Testing
Restrictions

[[Category:]]


Description

The cutting blade in a band saw is a continuous loop that travels through the machine on pulleys. In a vertical band saw, the blade travels vertically through a slot in a table, and workpieces are hand-fed through the blade to make a cut.

Wood-grain affects the forces and motions during cutting in a saw, so there are ripping fences and miter gauges as in a table saw. With metal cutting, the workpiece is usually clamped in a vise.

Pages in category "Vertical Band Saws -- Wood Cutting"

The following 2 pages are in this category, out of 2 total.