Forming Bench Rubric

From Artisan's Asylum

(Difference between revisions)
Jump to: navigation, search
 
Line 18: Line 18:
====Safe Operation====
====Safe Operation====
-
{{Cb}} Cut a piece of metal on the bench shear
 
{{Cb}} Show how to use the dapping block properly
{{Cb}} Show how to use the dapping block properly
{{Cb}} Show how to use the disc cutter
{{Cb}} Show how to use the disc cutter
Line 28: Line 27:
{{Cb}} Knows what hammer may be used for a steel punch
{{Cb}} Knows what hammer may be used for a steel punch
{{Cb}} Knows how to hold a mandrel in a bench vise
{{Cb}} Knows how to hold a mandrel in a bench vise
 +
{{Cb}} Understands the limited use of the black handled shears
[[Category:Jewelry Rubrics]]
[[Category:Jewelry Rubrics]]

Current revision as of 17:20, 17 April 2017

⌊ Student Name
⌊ Instructor Name
Pass ☐
Fail ☐
⌊ Date of Forming Benches test  (m / d / y)
⌊ Instructor Signature

This document is an internal Artisan's Asylum training document and is provided "as is", to be used as a reference only. Use of this document for any purposes other than as reference material (i.e., for the purposes of training and testing users on tools or equipment by other commercial entities or individuals) is not advised. In no event shall the authors of this material, or Artisan's Asylum, Inc., be liable for any claim, damages, or other liability whether in action or contract, arising from, out of, or in connection with the use of the information in this document for training, testing, or on-going safe use of fabrication equipment. Please consult your own lawyers and subject matter experts if you are looking to develop your own safety curriculum for fabrication equipment operation. Tool operators are responsible for their own safety, including reading and understanding the owners manual for this equipment and all of the warnings it contains.

Point out the following tools/features


☐ Commercial Hammer
☐ Silversmithing Hammer
☐ Delrin Hammer
☐ Rawhide Hammer
☐ Planishing Hammer
☐ Dapping Punches
☐ Disc Cutters
☐ Stamps
☐ Bench Shear
☐ Mandrels
☐ Rolling Mills
☐ Bench vise
☐ Draw Plate
☐ Black-handled Shears


Safe Operation


☐ Show how to use the dapping block properly
☐ Show how to use the disc cutter
☐ Show how to use the rolling mill
☐ Show what to do to make piece of metal okay to roll in mill

Troubleshooting


☐ Knows what kinds of steel can be used in the rolling mill
☐ Knows what hammer may be used for a steel punch
☐ Knows how to hold a mandrel in a bench vise
☐ Understands the limited use of the black handled shears

Personal tools
Wiki Maintenance