Metal Shear Rubric

From Artisan's Asylum

Revision as of 15:55, 27 January 2017 by Skochavi (Talk | contribs)
Jump to: navigation, search
⌊ Student Name
⌊ Instructor Name
Pass ☐
Fail ☐
⌊ Date of Metal Shears test  (m / d / y)
⌊ Instructor Signature

This document is an internal Artisan's Asylum training document and is provided "as is", to be used as a reference only. Use of this document for any purposes other than as reference material (i.e., for the purposes of training and testing users on tools or equipment by other commercial entities or individuals) is not advised. In no event shall the authors of this material, or Artisan's Asylum, Inc., be liable for any claim, damages, or other liability whether in action or contract, arising from, out of, or in connection with the use of the information in this document for training, testing, or on-going safe use of fabrication equipment. Please consult your own lawyers and subject matter experts if you are looking to develop your own safety curriculum for fabrication equipment operation. Tool operators are responsible for their own safety, including reading and understanding the owners manual for this equipment and all of the warnings it contains.

Questions for Student

☐ Where can you verify what thickness is appropriate to cut? (capacity chart on machine)
☐ Why is mesh not allowed on this tool? (interrupted cut and areas of work-hardening damage the blades)

Demonstration of Operation

☐ Cut a piece of sheet metal
☐ Cut a piece of wire with sheer (Jewelry studio shear)

☐ hands must be kept away from moving parts
Personal tools
Wiki Maintenance