Category:Electronics and Robotics Shop

From Artisans Asylum Wiki
Revision as of 20:21, 4 February 2024 by TidyBoxedElectrons (talk | contribs)
Electronics and Robotics
View of E&R shop
Electronics and Robotics
Lead Andrew Anselmo, Mike Beach
Tool Testers

Sign up here

Hours Same as membership hours; shop leads are available during Circuit Hacking Nights, Wednesdays 6-8 pm.


Electronics and Robotics (generally known as E&R) is an ~800 square foot shop where electronics and robotics projects can be worked upon.

Training and testing

Training and testing is REQUIRED before using this shop, especially with regard to soldering irons and oscilloscopes. If you're not sure if your experience is adequate, please contact the shop lead. Sign up here for tool training and testing. We can also test on Wednesday night Circuit Hacking Nights, from 6 pm to 8 pm.

Availability

This shop is available to members 24/7. We have 14 benches, however not all benches have all equipment. If there is a class running, please be cognizant of your own noise levels to try not to interfere with instruction.

Rules

  • Please do not enter the 'Cabinet of Why We Can't Have Nice Things' without permission. This contains parts and consumables for fixing equipment such as oscilloscopes and multimeters.
  • E&R is one of the few shops that has parts available for member projects. Please do not take all of a particular part; if you see the supply of something running low, let us know.
  • Tools should not leave the shop without notifying the shop leads. This includes soldering irons, oscilloscopes, wire strippers, flush cutters, and hand tools.
  • If you don't know where something goes, do not put it 'anywhere'; place it on the top of the rear cubby area. Our inventory of parts and equipment is useful only if things are in the correct places.
  • E&R NO FOOD OR DRINK
  • Use a maintenance tag (found at the front of the shop) if you think something is broken.
  • Use a project tag if a project is to be left for a short period of time.

General maintenance tag

Yellow project tag

Drift Bin

If a project is abandoned/unlabeled for any amount of time, you may find it in the Drift Bin. Please label your projects!

This bin is on top of Bench Alpha.

Drift Bin

Parts Index

We have a parts index so you can easily find parts and equipment. See: https://wiki.artisansasylum.com/images/1/1f/ENR_Inventory.pdf It is also generally located on each computer in the shop, and on Printmonster, the printing station. The wiki version should be the most up to date.

Usage tips

  • Use containers or cardboard boxes to transport projects, and label that container or box.
  • Remember to shut off equipment (soldering irons, exhaust fans, oscilloscopes, power supplies) and return cables to their proper racks after usage.

Etiquette

Please follow this shop etiquette so that we don't have to make more rules. As the mighty and awesome Rob Masek noted:

"Rule Zero: Don't do anything that makes us have to create another rule."

  • Fill out in-progress project tags completely -- with your name, contact information, and space number. A name isn't always enough information for someone to track you down if your project seems abandoned.

Layout

The shop has multiple benches and storage areas. The following will show the identification of the areas, which are needed in finding things from the inventory list.

Flammables

Flammables for E&R are stored in the yellow cabinet on the edge of the shop:

Flammables cabinet

PrintMonster

Printmonster is the printing station, and is located at the front of E&R.

PrintMonster

See https://wiki.artisansasylum.com/wiki/PrintMonster for details.

Bench Alpha

This bench contains an Ubuntu PC and Arduino sensor parts.

E&R Bench Alpha

Bench Bravo - Raspberry Pi

This bench contains a Raspberry Pi station, to connect to Raspberry Pi types 2 through 5, and Pi Zero systems. Please do not remove connection cables from E&R.

E&R Bench Bravo

Benches Charlie through Hotel

These are typical workbenches in E&R, with power supplies, oscilloscopes, signal generators, soldering irons, and tools for soldering.

Benches Charlie, Delta, Echo, Foxtrot, Golf and Hotel
Charlie Delta Echo
Enr bench charlie.jpg Enr bench delta.jpg Enr bench echo.jpg
Foxtrot Golf Hotel
Enr bench foxtrot.jpg Enr bench golf.jpg Enr bench hotel.jpg


Bench Indigo

This workbench contains an Ubuntu PC, which is hooked up to the stereo microscope. It also has some power supplies, and oscilloscope, signal generator, a soldering iron.

E&R Bench Indigo

Bench Juliet

This workbench contains Windows PC, and also is where multimeters and other hand-held equipment is stored.

E&R Bench Juliet

Bench Kilo

This workbench has a toaster oven (NO FOOD!) for surface mount work, a stereo microscope, and a soldering iron for surface mount work.

E&R Bench Kilo

Bench Lima

This workbench has a stereo microscope, and a soldering iron for surface mount work.

E&R Bench Lima

Bench Mike

This workbench has a Windows PC which runs the OtherMill, a circuit board creation tool. This tool needs training to be used.

E&R Bench Mike

Bench November

This bench contains elements for amateur radio work, and anything involving antennas, radio frequency reception and transmission. The Boston Amateur Radio Club (https://www.barc.org) uses this space from time to time, and has stores some things here as well.

E&R Bench November

Storage Areas

These storage areas are carefully curated and inventoried. If you don't know where something should go, put it on the back shelf with a tag, and we will store it correctly.

Tall Shelves Alpha, Bravo, and Charlie

The tall shelves are shown below. Shelf Alpha is on the right, Shelf Bravo is in the middle, and Shelf Charlie is on the left. Do NOT climb the shelves, or stand on chairs to reach parts above.

E&R Main Tall Shelves

Toolbox

The toolbox is located between the tall shelves and Bench Bravo. A shop style vacuum cleaner is below. Please do not remove tools from E&R without permission. When taking tool screwdriver or allen key sets, take the entire tool set to the bench. This helps prevent tools from missing elements.

E&R Toolbox and Vacuum

XYZ Table

The XYZ table runs from the computer on the other side, on the rolling cart.

E&R XYZ table

Rolling Cart

The rolling cart contains a Windows 10 computer hooked up to the overhead projector. The projector acts as a second screen, or can be configured to mirror the PC screen.

Overhead Projector

The overhead projector is on top of Bench Golf. Do not forget to turn it off after use.

Back Wall and Cubbies

E&R cubbies

Cabinet of Why We Can't Have Nice Things

This is a shop cabinet, used by shop leads to store equipment to fix multimeters, soldering irons, and oscilliscopes. Please do not enter without permission.

E&R Cabinet of Why We Can't Have Nice Things

Bookshelf

This contains some parts, as well as some books on electricity, electronics, and back issues of Make magazine. Please do not remove anything without permission from the shop leads.

Corner

The corner area contains a small white board and other miscellany.

E&R Corner Area

Wire storage

We have three wire storage racks; on some of these racks are probes for oscilloscopes and multimeters.

Wire Spool Racks
Wire Rack 1 Wire Rack 2 Wire Rack 3
Lead free solder, small wire More wire Heavy Wire
Enr wirerack 1.jpg Enr wirerack 2.jpg Enr wirerack 3.jpg


Front Wire Shelving Rack, Demos, and Donations

This front area shows some basic demos during Circuit Hacking Night, and also holds our donations jar.

E&R Front Wire Shelving, Demos, and Donations

Donations to Electronics and Robotics in cash can be placed here.

E&R Donations

Rear Parts Area

The rear parts area has old Radio Shack shelves (1-4) on the floor, and a few layers of shelves above. Shelves 1, 2, and 3 have columns (A is on the left, and B, C, D etc. go to the right...)

E&R Radio Shack bins and shelves

Baker's racks are on the other side.

E&R Rear Baker's Racks

Help us improve

E-mail the shop lead with your concerns, comments, questions, and suggestions for improvement. Let us know if the shop was left not ready-to-use, equipment is malfunctioning, a consumable is running low, if you want to help drive an improvement project, or if you can think of anything else that will make the shop a better resource for you!

Pages in category "Electronics and Robotics Shop"

This category contains only the following page.