Sharp Manual Milling Machine

From Artisans Asylum Wiki
Revision as of 21:22, 4 March 2024 by Jfbredt (talk | contribs)

Link to: Machine Shop Main Page

Warning Safety glasses Eye protection required!



Sharp Milling Machines
One of the two Sharp mills in the Machine Shop
General Info
Make Sharp
Model
Serial
Specs
Manual Operating Manual
Asylum Info
Location Machine Shop
Rubric N/A
Training
Testing Tool testing
Restrictions red

See the Milling Machines category for notes on using all 3-Axis Milling Machines


Safety

Link to: Safety notes on the Milling Machine Category page

Description

There are two Sharp LMV manual units in service in the Machine Shop:

"Click" has two motor drives on the two table movement axes. It has a manual drawbar for changing tools. It is located next to the garage-door exit to the loading dock.

"Clack" has non-functioning servo motors on the two horizontal axes, with cranks for manual control. This machine has an air-actuated drawbar in the spindle for tool changing. It is located to the right of the Accupath CNC machine.

Clack power drawbar
The pneumatic drive on the Sharp mill gives "Clack" it's name.
Click manual tool change
Manually changing the tool on Mill "Click."