View source for File:Lathe coordinate system.jpg

From Artisans Asylum Wiki

← File:Lathe coordinate system.jpg

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in one of the groups: Users, ShopLeads.

You can view and copy the source of this page.

== Summary ==
The X and Z axes of a lathe. The carriage moves along the Z axis, which gets increasingly positive as the carriage moves away from the headstock. The cross slide moves along the X axis, which gets increasingly positive as the cross slide moves away from the operator side.

Return to File:Lathe coordinate system.jpg.

Retrieved from "http://wiki.artisansasylum.com/wiki/File:Lathe_coordinate_system.jpg"