DigiFab exhaust blower: Revision history

From Artisans Asylum Wiki

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

13 August 2026

  • curprev 23:5923:59, 13 August 2026 Sadie talk contribs 679 bytes +148 Noted access tools needed Tag: 2017 source edit
  • curprev 23:4223:42, 13 August 2026 Sadie talk contribs 531 bytes +531 Created page with "The DigiFab laser cutters and SLA printer(s) are exhausted by an exhaust blower in the ceiling duct work (just inside entrance). The system consists of a 1 HP single phase variable-speed AC motor - model Vari-GREEN P/N 356599 - the variable speed control is outside the exhaust duct - it's usually left on 100% speed. Control pot P/N 385806 350px|Speed control potentiometer The motor drives a pair of ~9" diameter x 10" wide squirrel-cage b..."
Retrieved from "https://wiki.artisansasylum.com/wiki/DigiFab_exhaust_blower"