Digifab Shop Plan: Difference between revisions

From Artisans Asylum Wiki
 
(11 intermediate revisions by 2 users not shown)
Line 12: Line 12:
==One off tasks:==
==One off tasks:==
* define shop policies  
* define shop policies  
* improve and document tool tests
* improve and document tool tests FDM - Fiona & Quantum, Laser - Julienne & Nick, Resin Drew & Jason
* - FDM notes: Need to 1). update tool test sheet 2). Pre-flight checklist for each machine on wiki 3). Format Pre-flight checklist to something that can be printed and placed in front of the printers (lasercut or laminate, smaller than an 11 x 8.5 paper) 4). a dry-erase surface for users to quickly sign with info without wasting yellow tags that people seldom use anyway? Orrr, just some lined paper notepad, so that we have a record of prints and names in front of the machine? - Fiona
 
* train new assistant shop leads and tool testers
* train new assistant shop leads and tool testers
* create 5 min task system
* create 5 min task system
* Improve laser scrap bin
* Improve laser scrap bin
* improve shop signage
* improve shop signage
* Start shop night
* Start shop night - Julienne & Fiona
* Create maintenance logs for each machine on the wiki
* Create maintenance logs for each machine on the wiki
* Create maintenance schedules for each machine
* Create maintenance schedules for each machine
* Organize Staff only area
* Organize Staff only area
* inventory spare parts
* inventory spare parts
* Figure out budget/burn-rate of consumable materials (How much have we been spending in the past?)


==Machine repairs/upgrades==
==Machine repairs/upgrades==
* Prusa 2 diagnose rebooting problem
* Prusa 2 diagnose rebooting problem - heat block needs replacement - Sadie
* Prusa 1 reroute hot end cable that's mis routed under the polished rod
* Prusa 1 reroute hot end cable that's mis routed under the polished rod - Quantum
* Setup the Bambu AMS
* Setup the Bambu AMS - Julienne & Kevin
* Get ender 5, prusa 3 and, ender 6 on nexudus
* Get ender 5, prusa 3 and, ender 6 on nexudus - Nick
* Enclose Ender 5 - Nick
* Enclose Ender 5 - Nick
* Get touch probe on ender 6 and bring online
* Get touch probe on ender 6 and bring online - Sadie
 
==Shop Engagement==
* Open Shop nights - One or two of us host, impromptu tool tests can be done, can go over a specific skills or just chill
* Class ideas - 3D print and Laser 101, CAD-O'-Lantern class - Julienne, Fiona, Doug?

Latest revision as of 18:40, 18 September 2024

Ongoing tasks:

  • sweep the floor
  • mop the floor?
  • clean the tables
  • take out the trash
  • sort scrap bin
  • organized filament stock
  • clean up printer tables
  • tag and report broken machines
  • improve this list

One off tasks:

  • define shop policies
  • improve and document tool tests FDM - Fiona & Quantum, Laser - Julienne & Nick, Resin Drew & Jason
  • - FDM notes: Need to 1). update tool test sheet 2). Pre-flight checklist for each machine on wiki 3). Format Pre-flight checklist to something that can be printed and placed in front of the printers (lasercut or laminate, smaller than an 11 x 8.5 paper) 4). a dry-erase surface for users to quickly sign with info without wasting yellow tags that people seldom use anyway? Orrr, just some lined paper notepad, so that we have a record of prints and names in front of the machine? - Fiona
  • train new assistant shop leads and tool testers
  • create 5 min task system
  • Improve laser scrap bin
  • improve shop signage
  • Start shop night - Julienne & Fiona
  • Create maintenance logs for each machine on the wiki
  • Create maintenance schedules for each machine
  • Organize Staff only area
  • inventory spare parts
  • Figure out budget/burn-rate of consumable materials (How much have we been spending in the past?)

Machine repairs/upgrades

  • Prusa 2 diagnose rebooting problem - heat block needs replacement - Sadie
  • Prusa 1 reroute hot end cable that's mis routed under the polished rod - Quantum
  • Setup the Bambu AMS - Julienne & Kevin
  • Get ender 5, prusa 3 and, ender 6 on nexudus - Nick
  • Enclose Ender 5 - Nick
  • Get touch probe on ender 6 and bring online - Sadie

Shop Engagement

  • Open Shop nights - One or two of us host, impromptu tool tests can be done, can go over a specific skills or just chill
  • Class ideas - 3D print and Laser 101, CAD-O'-Lantern class - Julienne, Fiona, Doug?