Category:Casting Shop: Difference between revisions

From Artisans Asylum Wiki
(Created page with "Description: People use the casting shop to make small metal castings for jewelry, sculpture, and engineering in gold, silver, and copper alloys. Facilities include: Investment bench, sand-casting bench, kilns, vacuum caster, oxy-propane torch, wax-working bench, vulcanizer. (Links to tool resource pages) Classes in lost-wax casting and sand casting are offered. (Links to class listings) Casting Techniques: Lost-wax casting: Starting with a wax pattern, shop us...")
 
No edit summary
Line 1: Line 1:
Description:   
== Description: ==  
People use the casting shop to make small metal castings for jewelry, sculpture, and  engineering in gold, silver, and copper alloys.  Facilities include:  Investment bench, sand-casting bench, kilns, vacuum caster, oxy-propane torch, wax-working bench, vulcanizer. (Links to tool resource pages)  Classes in lost-wax casting and sand casting are offered. (Links to class listings)
People use the casting shop to make small metal castings for jewelry, sculpture, and  engineering in gold, silver, and copper alloys.  Facilities include:  Investment bench, sand-casting bench, kilns, vacuum caster, oxy-propane torch, wax-working bench, vulcanizer. (Links to tool resource pages)  Classes in lost-wax casting and sand casting are offered. (Links to class listings)



Revision as of 00:45, 8 November 2023

Description:

People use the casting shop to make small metal castings for jewelry, sculpture, and engineering in gold, silver, and copper alloys. Facilities include: Investment bench, sand-casting bench, kilns, vacuum caster, oxy-propane torch, wax-working bench, vulcanizer. (Links to tool resource pages) Classes in lost-wax casting and sand casting are offered. (Links to class listings)

Casting Techniques: Lost-wax casting: Starting with a wax pattern, shop users make molds in gypsum-based investment. Molds are heat-treated in a kiln and then cast in metal with a vacuum-casting machine. Picture: \Main_page_pix\lost_wax_pour.jpg (Link to lost-wax casting class listing) Sand-casting: Durable patterns are pressed into oil-bonded sand to make a mold that can be cast in metal with no heat treatment. (Link to sand-casting class listing) Rubber molding: Durable, nonporous patterns are molded in heat-vulcanized rubber to be reproduced in wax with a pressure-injector.

Tools: Vacuum caster: This machine pulls air through the pores of a lost-wax mold to draw the molten metal into fine detail during casting. RED tool: Tool-testing required. (Link to vacuum caster resource page) Located under the hood against the south wall. Sentry Kiln: For heat-teating and bunr-out of lost-wax molds. RED tool: Tool-testing required. (Link to Sentry kiln resource page) Programmable controller, temp limit: 1350 F. Electromelt furnace: For melting metals to cast. RED tool: Tool testing required. Removable graphite crucibles for different metals, including gold, silver, argentium, bronze, brass. Temperature limit: 2000 F. (Link to Electromelt resource page)

Safety: There are significant hazards in this lab. Molten metal can cause very severe, crippling burns. Eye protection, closed-toe shoes, dust masks, hot gloves, aprons, must be worn at various times when tools are in use. Dust contains crystalline silica: Dust masks required. Precautions are similar to those for welding. (Link to casting shop safety page)

Pages in category "Casting Shop"

This category contains only the following page.