Digifab Shop Plan: Difference between revisions
From Artisans Asylum Wiki
No edit summary |
|||
| Line 13: | Line 13: | ||
* define shop policies | * define shop policies | ||
* improve and document tool tests FDM - Fiona & Quantum, Laser - Julienne & Nick, Resin Drew & Jason | * improve and document tool tests FDM - Fiona & Quantum, Laser - Julienne & Nick, Resin Drew & Jason | ||
* - FDM notes: Need to 1). update tool test sheet 2). Pre-flight checklist for each machine on wiki 3). Format Pre-flight checklist to something that can be printed and placed in front of the printers (lasercut or laminate, smaller than an 11 x 8.5 paper) 4). a dry-erase surface for users to quickly sign with info without wasting yellow tags that people seldom use anyway? Orrr, just some lined paper notepad, so that we have a record of prints and names in front of the machine? | * - FDM notes: Need to 1). update tool test sheet 2). Pre-flight checklist for each machine on wiki 3). Format Pre-flight checklist to something that can be printed and placed in front of the printers (lasercut or laminate, smaller than an 11 x 8.5 paper) 4). a dry-erase surface for users to quickly sign with info without wasting yellow tags that people seldom use anyway? Orrr, just some lined paper notepad, so that we have a record of prints and names in front of the machine? - Fiona | ||
* train new assistant shop leads and tool testers | * train new assistant shop leads and tool testers | ||
Revision as of 18:39, 18 September 2024
Ongoing tasks:
- sweep the floor
- mop the floor?
- clean the tables
- take out the trash
- sort scrap bin
- organized filament stock
- clean up printer tables
- tag and report broken machines
- improve this list
One off tasks:
- define shop policies
- improve and document tool tests FDM - Fiona & Quantum, Laser - Julienne & Nick, Resin Drew & Jason
- - FDM notes: Need to 1). update tool test sheet 2). Pre-flight checklist for each machine on wiki 3). Format Pre-flight checklist to something that can be printed and placed in front of the printers (lasercut or laminate, smaller than an 11 x 8.5 paper) 4). a dry-erase surface for users to quickly sign with info without wasting yellow tags that people seldom use anyway? Orrr, just some lined paper notepad, so that we have a record of prints and names in front of the machine? - Fiona
- train new assistant shop leads and tool testers
- create 5 min task system
- Improve laser scrap bin
- improve shop signage
- Start shop night - Julienne & Fiona
- Create maintenance logs for each machine on the wiki
- Create maintenance schedules for each machine
- Organize Staff only area
- inventory spare parts
- Figure out budget/burn-rate of consumable materials (How much have we been spending in the past?)
Machine repairs/upgrades
- Prusa 2 diagnose rebooting problem - heat block needs replacement - Sadie
- Prusa 1 reroute hot end cable that's mis routed under the polished rod - Quantum
- Setup the Bambu AMS - Julienne & Kevin
- Get ender 5, prusa 3 and, ender 6 on nexudus - Nick
- Enclose Ender 5 - Nick
- Get touch probe on ender 6 and bring online - Sadie
Shop Engagement
- Open Shop nights - One or two of us host, impromptu tool tests can be done, can go over a specific skills or just chill
- Class ideas - 3D print and Laser 101, CAD-O'-Lantern class
