User:Dgabbe

From Artisans Asylum Wiki
Revision as of 14:40, 11 July 2024 by Dgabbe (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

test for new milling machine table.<ref>testing</ref>

Specifics of Each Mill

Feature Bridgeport Middle Sharp Right Sharp
Model Bridgeport Series 1 Sharp ?? Sharp ??
Speeds Better low RPM torque Higher RPM Higher RPM
DRO Acurite[1] none get info
Lead Screws acme acme ball[2]
Manuals get links get links get links
Vise Base Keyed Keyed No key
Max Vise Opening (in) 7.5 7.5 8.8
Feature
Feature
Feature
Feature

Common Features

Notes

<references />

[1] The scales have a course resolution so the sensitivity is more like turning the axis handwheels - good to +/- 0.001 - 0.002 inch

[2] The ball screws have significantly less backlash