DigiFab exhaust blower

From Artisans Asylum Wiki

Revision as of 23:42, 13 August 2026 by Sadie (talk | contribs) (Created page with "The DigiFab laser cutters and SLA printer(s) are exhausted by an exhaust blower in the ceiling duct work (just inside entrance). The system consists of a 1 HP single phase variable-speed AC motor - model Vari-GREEN P/N 356599 - the variable speed control is outside the exhaust duct - it's usually left on 100% speed. Control pot P/N 385806 350px|Speed control potentiometer The motor drives a pair of ~9" diameter x 10" wide squirrel-cage b...")

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)

The DigiFab laser cutters and SLA printer(s) are exhausted by an exhaust blower in the ceiling duct work (just inside entrance).

The system consists of a 1 HP single phase variable-speed AC motor - model

Vari-GREEN P/N 356599 - the variable speed control is outside the exhaust duct - it's usually left on 100% speed. Control pot P/N 385806

The motor drives a pair of ~9" diameter x 10" wide squirrel-cage blowers

Retrieved from "https://wiki.artisansasylum.com/index.php?title=DigiFab_exhaust_blower&oldid=7448"