All public logs

Combined display of all available logs of Artisans Asylum Wiki. You can narrow down the view by selecting a log type, the username (case-sensitive), or the affected page (also case-sensitive).

• 11:57, 8 November 2023 Jfbredt talk contribs created page Casting Shop Safety (Created page with "== Casting Shop Safety == The shop is divided into halves. The front half with the workbench is used for lecturing and wax-working, and the rear half is used for everything else. Common sense dictates that minimal safety precautions are needed while work is confined to the front. All that follows pertains to the back half of the casting shop. Safety protocols in the shop are very similar to those for the Metals Shop. Wear eye protection, natural fibers, and close...")
• 11:47, 8 November 2023 Jfbredt talk contribs uploaded File:Electromelt resource pic.jpg (30-oz Electromelt in the Holton Casting Shop)
• 11:47, 8 November 2023 Jfbredt talk contribs created page File:Electromelt resource pic.jpg (30-oz Electromelt in the Holton Casting Shop)
• 11:47, 8 November 2023 Jfbredt talk contribs created page Electromelt Tool Resource Page (Created page with "Picture: \Tool_resource_pix\electromelt_resource_pic.jpg {| class="infobox" cellspacing="5" style="width: 22em; text-align: left; font-size: 88%; line-height: 1.5em;" ! colspan="2" class="infobox-image" | 350px|30-oz Electromelt in the Casting Shop |- | colspan="2" | Electromelt in the Casting Shop |- |} This is a '''RED'' tool. No reservation required '''Kerr Electromelt furnace''' (now sold as Ventura-Melt) for casting metals...")
• 11:40, 8 November 2023 Jfbredt talk contribs uploaded File:Vac caster resource pic.jpg (Vacuum caster in the Holton Casting Shop.)
• 11:40, 8 November 2023 Jfbredt talk contribs created page File:Vac caster resource pic.jpg (Vacuum caster in the Holton Casting Shop.)
• 11:07, 8 November 2023 Jfbredt talk contribs created page Vacuum Caster Tool Resource Page (Created page with "Picture: \Tool_resource_pix\vac_caster_resource_pic.jpg This is a RED tool. Reservation not required. Professional Casting System vacuum casting machine (Formerly Arbe "Kaya-Cast").  Used for evacuating air bubbles from mixtures of investment and applying a vacuum to porous investment molds during metal pouring.  It enables very precise casting of fine jewelry using the standardized molding flasks in the shop, and optionally some others.  The mold is preheated to...")
• 10:55, 8 November 2023 Jfbredt talk contribs uploaded File:Sentry kiln resource pic.jpg (Sentry Kiln in the Casting Shop)
• 10:55, 8 November 2023 Jfbredt talk contribs created page File:Sentry kiln resource pic.jpg (Sentry Kiln in the Casting Shop)
• 10:50, 8 November 2023 Jfbredt talk contribs uploaded File:Casting shop view.jpg (Picture of the casting shop, ca. April 2023)
• 10:50, 8 November 2023 Jfbredt talk contribs created page File:Casting shop view.jpg (Picture of the casting shop, ca. April 2023)
• 01:01, 8 November 2023 Jfbredt talk contribs created page Sentry Kiln Tool Resource Page (Created page with "Picture: \Tool_resource_pix\sentry_kiln_resource_pic.jpg This is a '''RED''' tool. Reservation required 8" x 8" x 8" Sentry kiln for burning out lost-wax molds in the casting shop.  You must be tool-tested in the casting shop to use this tool.  Capacity: 4- 3"diameter x 4" height lost wax molds.  Typical max temperature is 1350 F.  Burnout of molds takes about 10 hours.  Molds can be burned out in advance and stored until you are ready to cast, then preheat mold...")
• 00:51, 8 November 2023 Jfbredt talk contribs created page Sentry kiln rsrc (Created page with "Picture: \Tool_resource_pix\sentry_kiln_resource_pic.jpg This is a RED tool. Reservation required 8" x 8" x 8" Sentry kiln for burning out lost-wax molds in the casting shop.  You must be tool-tested in the casting shop to use this tool.  Capacity: 4- 3"diameter x 4" height lost wax molds.  Typical max temperature is 1350 F.  Burnout of molds takes about 10 hours.  Molds can be burned out in advance and stored until you are ready to cast, then preheat molds to 9...")
• 00:37, 8 November 2023 Jfbredt talk contribs created page Casting Shop (Created page with "Description: People use the casting shop to make small metal castings for jewelry, sculpture, and engineering in gold, silver, and copper alloys. Facilities include: Investment bench, sand-casting bench, kilns, vacuum caster, oxy-propane torch, wax-working bench, vulcanizer. (Links to tool resource pages) Classes in lost-wax casting and sand casting are offered. (Links to class listings) Casting Techniques: Lost-wax casting: Starting with a wax pattern, shop us...")