Sentry kiln rsrc: Revision history

From Artisans Asylum Wiki

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

8 November 2023

  • curprev 00:5200:52, 8 November 2023‎ Jfbredt talk contribs‎ 1,050 bytes +4‎ No edit summary
  • curprev 00:5100:51, 8 November 2023‎ Jfbredt talk contribs‎ 1,046 bytes +1,046‎ Created page with "Picture: \Tool_resource_pix\sentry_kiln_resource_pic.jpg This is a RED tool. Reservation required 8" x 8" x 8" Sentry kiln for burning out lost-wax molds in the casting shop.  You must be tool-tested in the casting shop to use this tool.  Capacity: 4- 3"diameter x 4" height lost wax molds.  Typical max temperature is 1350 F.  Burnout of molds takes about 10 hours.  Molds can be burned out in advance and stored until you are ready to cast, then preheat molds to 9..."
Retrieved from "http://wiki.artisansasylum.com/wiki/Sentry_kiln_rsrc"