Abrasive Blade Metal Chop Saw: Difference between revisions
From Artisans Asylum Wiki
(Created page with "Category:ToolsCategory:Metal Shop {{ToolBox |tool_title = Abrasive Blade Chop Saw |tool_subtitle = Abrasive Blade Chop Saw |image = Metal_shop_chop_saw_nolabels.png |caption = Dewalt D28710 Chop Saw |make = Dewalt |model = D28710 |serial = Unknown |manufacturer_specs = |manual = |location = Metal Shop |rubric = |training...") |
No edit summary |
||
| Line 22: | Line 22: | ||
==Use for:== | ==Use for:== | ||
* Hardened Steel | |||
* Mild Steel | |||
==Do Not Use for:== | |||
•Aluminum | |||
* Copper | |||
* Brass,Bronze | |||
''Soft metals will gum up the abrasive cutting disk.'' | |||
* Zinc (or anything galvanized). | |||
* Titanium | |||
| Line 34: | Line 51: | ||
|} | |} | ||
* Tool | * '''Tool is very loud. Hearing protection required.''' | ||
* | * '''Flying pieces from broken abrasive discs/ blades. Eye protection required.''' | ||
* | * Prevent drawn-in injuries. '''No loose clothing or gloves.''' | ||
* | * Cuts/ scrapes from sharp cut edges of work•Burns from hot work pieces | ||
* | * Breathing particulates thrown into the air. Respiratory protection recommended. | ||
==Operation Notes== | ==Operation Notes== | ||
{{EyeWarning}} | {{EyeWarning}} | ||
Revision as of 15:02, 9 February 2024
| Abrasive Blade Chop Saw | |
|---|---|
| General Info | |
| Make | Dewalt |
| Model | D28710 |
| Serial | Unknown |
| Specs | |
| Manual | |
| Asylum Info | |
| Location | Metal Shop |
| Rubric | |
| Training | Tool classes |
| Testing | Tool testing, or [[:Category:Metal Shop#Tool Testing
Night|come to the shop on Tool Testing Night]] |
| Restrictions | red |
Metal Shop
Use for:
- Hardened Steel
- Mild Steel
Do Not Use for:
•Aluminum
- Copper
- Brass,Bronze
Soft metals will gum up the abrasive cutting disk.
- Zinc (or anything galvanized).
- Titanium
Hazard Analysis
| |
|---|---|
- Tool is very loud. Hearing protection required.
- Flying pieces from broken abrasive discs/ blades. Eye protection required.
- Prevent drawn-in injuries. No loose clothing or gloves.
- Cuts/ scrapes from sharp cut edges of work•Burns from hot work pieces
- Breathing particulates thrown into the air. Respiratory protection recommended.
Operation Notes
 |
 |
Eye protection required! |
|---|---|---|
| |
|---|---|
| Chop Saw clamping tips |
