Drill Press Delta Bench 11-990: Difference between revisions
From Artisans Asylum Wiki
No edit summary |
No edit summary |
||
| Line 5: | Line 5: | ||
|tool_subtitle = Drill Press | |tool_subtitle = Drill Press | ||
|image = drill_press_delta_bench.png | |image = drill_press_delta_bench.png | ||
|caption = The Delta bench-top drill press | |caption = The Wood Shop's Delta bench-top drill press | ||
|make = Delta | |make = Delta | ||
|model = 11-990 | |model = 11-990 | ||
Revision as of 17:32, 20 February 2024
| Delta Benchtop Drill Press | |
|---|---|
| General Info | |
| Make | Delta |
| Model | 11-990 |
| Serial | Unknown |
| Specs | |
| Manual | Delta 11-990 manual |
| Asylum Info | |
| Location | Wood Shop |
| Rubric | |
| Training | |
| Testing | |
| Restrictions | red |
See the Drill Presses category for notes on using all Drill Presses
This is a bench-top drill press.
Changing the Spindle Speed
1. Unplug the machine.
2. Lift up the belt and pulley guard (A).
3. Loosen the tension lock knob (B) and pivot the motor forward.
4. Use the chart (D) on the inside of the cover to select the desired spindle speed.
4. Move the belt (C) to the desired position on the two pulleys.
5. Push the motor back to tension the belt and tighten the lock knob.
6. Correct tension is when the belt can be flexed about 1" with light pressure.
| |
|---|---|
| Changing the spindle speed on the Delta benchtop drill press. |
