Sentry Kiln Tool Resource Page: Difference between revisions

From Artisans Asylum Wiki
No edit summary
mNo edit summary
 
(21 intermediate revisions by 3 users not shown)
Line 6: Line 6:
   |caption            = Sentry Kiln
   |caption            = Sentry Kiln
   |make              = Sentry
   |make              = Sentry
   |model              = This is a RED tool.
   |model              = This is a [[RED]] tool.
   |serial            = Froot Loops
   |serial            = [https://artisans.spaces.nexudus.com/bookings/search?group=# Sentry Kiln Reservation Required]
   |manufacturer_specs =  8x8x8 inches 1350 F max
   |manufacturer_specs =  8x8x8 inches 1350 F max
  |manual            = [https://www.dropbox.com/s/30k4snls68syisb/Sentry%20Kiln%20Manual.PDF?dl=0] 
 
   |location          = Casting Shop
   |location          = Casting Shop
   |training          =   
   |training          =   
   |testing            = [https://www.artisansasylum.com/tool-testing Sign up here]
   |testing            = [https://calendly.com/jones-alethea/30min?back=1&month=2022-12 Sign up here]
  |restrictions      = red
   |tool_categories    = [[Category:Casting Shop]]
   |tool_categories    = [[Category:Casting Shop]]
  |rubric            =
}}
}}
'''This is a <span style="color:red">RED</span> tool - Training and testing required.  Tool reservation required.''' Reservation of the kiln includes reservation of all shop tools used during the investment casting process.
Sentry Xpress (Paragon) kiln is used for the burnout of flasks during the investment casting process.
An overview of the kiln can be found here:
https://drive.google.com/file/d/1nWk7ORus_I1UQYEqMOFJMAKotvxVN4bi/view?usp=sharing


This is a '''RED''' tool.  Reservation required


8" x 8" x 8" Sentry kiln for burning out lost-wax molds in the casting shop.  You must be tool-tested in the casting shop to use this tool.  Capacity: 4- 3"diameter x 4" height lost wax molds.  Typical max temperature is 1350 F.  Burnout of molds takes about 10 hours.  Molds can be burned out in advance and stored until you are ready to cast, then preheat molds to 900-1100 F.
A user manual for this kiln can be found here:


You must run the shop ventilators and wear gloves and eye protection when using this tool.
https://drive.google.com/file/d/1Fz0bWnLy9L-JcL7Kv9kinUK3OaHalajl/view?usp=share_link


Summary instructions for operation can be found here:


https://www.dropbox.com/scl/fi/fywzf5y6ufyyq6dgihb3b/kiln_quick_start.jpg?rlkey=cyt0cgq9ixo8q0dexhg4h0oi4&dl=0
A troubleshooting guide for this kiln can be found here:


A user manual for this tool can be found here:
https://drive.google.com/file/d/1D3wPC8SrlswvlrWHiiGhXnbqJTmF8aa6/view?usp=sharing


https://www.dropbox.com/s/30k4snls68syisb/Sentry%20Kiln%20Manual.PDF?dl=0
On the kiln's relays:


Instructions can also be found in the lost-wax class handout here:
https://kilnfrog.com/blogs/frogblog/understanding-kiln-relays-for-new-kiln-buyers-and-owners-kiln-frog


https://www.dropbox.com/scl/fi/fmu1skmdkiaeya27uhym4/Lost-Wax-Class-Handout.pdf?rlkey=m1sxqfcuze5khie3um1eit364&dl=0
https://drive.google.com/file/d/1qyJNYExROdb3vF5vmSvXyNrK0-JrwSoz/view?usp=sharing

Latest revision as of 17:05, 11 June 2024


Sentry Kiln
Sentry Kiln
General Info
Make Sentry
Model This is a RED tool.
Serial Sentry Kiln Reservation Required
Specs 8x8x8 inches 1350 F max
Manual {{{manual}}}
Asylum Info
Location Casting Shop
Rubric
Training
Testing Sign up here
Restrictions red

This is a RED tool - Training and testing required. Tool reservation required. Reservation of the kiln includes reservation of all shop tools used during the investment casting process.

Sentry Xpress (Paragon) kiln is used for the burnout of flasks during the investment casting process.


An overview of the kiln can be found here:

https://drive.google.com/file/d/1nWk7ORus_I1UQYEqMOFJMAKotvxVN4bi/view?usp=sharing


A user manual for this kiln can be found here:

https://drive.google.com/file/d/1Fz0bWnLy9L-JcL7Kv9kinUK3OaHalajl/view?usp=share_link


A troubleshooting guide for this kiln can be found here:

https://drive.google.com/file/d/1D3wPC8SrlswvlrWHiiGhXnbqJTmF8aa6/view?usp=sharing

On the kiln's relays:

https://kilnfrog.com/blogs/frogblog/understanding-kiln-relays-for-new-kiln-buyers-and-owners-kiln-frog

https://drive.google.com/file/d/1qyJNYExROdb3vF5vmSvXyNrK0-JrwSoz/view?usp=sharing