Plasmatron Nozzle Assembly Instructions: Difference between revisions

From Artisans Asylum Wiki
No edit summary
Line 5: Line 5:
==Oveview==
==Oveview==


The Torchmate CNC plasma cutter (also known as the Plasmatron) uses a [https://www.dropbox.com/s/lida6dswhecqvt8/OM_806650_R4_Powermax65-85.pdf?dl=0 Hypertherm PowerMax85] plasma torch as its cutting tool
The Torchmate CNC plasma cutter (also known as the Plasmatron) uses a [https://www.dropbox.com/s/lida6dswhecqvt8/OM_806650_R4_Powermax65-85.pdf?dl=0 Hypertherm PowerMax85] plasma torch as its cutting tool.  The torch is carried on the robot gantry in a vertical orientation.  The cutting tip consists of an assembly of five parts.  It must be assembled by the user and if it isn't done correctly, the machine will fail to cut or it will cut poorly.


==The Torch Parts==
==The Torch Parts==

Revision as of 10:53, 26 August 2024


Link to: Plasma Shop main page

Oveview

The Torchmate CNC plasma cutter (also known as the Plasmatron) uses a Hypertherm PowerMax85 plasma torch as its cutting tool. The torch is carried on the robot gantry in a vertical orientation. The cutting tip consists of an assembly of five parts. It must be assembled by the user and if it isn't done correctly, the machine will fail to cut or it will cut poorly.

The Torch Parts

The

45A nozzle
45-Amp large format nozzle (copper)
Fine Cut nozzle
"Fine-Cut" small format nozzle (copper)