Sentry Kiln Tool Resource Page: Difference between revisions

Sentry Kiln
Sentry Kiln
	Sentry Kiln
	General Info
Make	Sentry
Model	This is a RED tool.
Serial	Sentry Kiln Reservation Required
Specs	8x8x8 inches 1350 F max
Manual	Sentry Kiln Manual
	Asylum Info
Location	Casting Shop
Rubric	Instructions
Training
Testing	Sign up here
Restrictions	{{{restrictions}}}

Revision as of 03:59, 31 December 2023

This is a RED tool - Training and testing required. Reservation required.

Sentry Xpress (Paragon) kiln for burning out flasks for investment casting.

An overview of the kiln can be found here:

link soon to come.

A user manual for this tool can be found here:

@@ Line 22: / Line 22: @@
 This is a [[RED]] tool - Training and testing required.  Reservation required.
-" x 8" x 8" Sentry kiln for burning out lost-wax molds in the casting shop.  You must be tool-tested in the casting shop to use this tool.  Capacity: 4- 3"diameter x 4" height lost wax molds.  Typical max temperature is 1350 F.  Burnout of molds takes about 10 hours.  Molds can be burned out in advance and stored until you are ready to cast, then preheat molds to 900-1100 F.
+Sentry Xpress (Paragon) kiln for burning out flasks for investment casting.
-You must run the shop ventilators and wear gloves and eye protection when using this tool.
-Summary instructions for operation can be found here:
+An overview of the kiln can be found here:
+link soon to come.
-https://www.dropbox.com/scl/fi/fywzf5y6ufyyq6dgihb3b/kiln_quick_start.jpg?rlkey=cyt0cgq9ixo8q0dexhg4h0oi4&dl=0
 A user manual for this tool can be found here:
-https://www.dropbox.com/s/30k4snls68syisb/Sentry%20Kiln%20Manual.PDF?dl=0
+https://drive.google.com/file/d/1Fz0bWnLy9L-JcL7Kv9kinUK3OaHalajl/view?usp=share_link