Brackets Tutorial 5: Advanced Cardboard Aided Design: Difference between revisions
From Artisans Asylum Wiki
No edit summary |
|||
| Line 5: | Line 5: | ||
=Introduction= | =Introduction= | ||
This tutorial covers a photographic technique for gathering data from an existing part. As an example, we use one of the [:Brackets_Tutorial_2b:_Fabricating_a_Bracket_from_a_Solidworks_Design#Sheet_Metal_Blank | sheet-metal blanks] from Tutorial 2b. | This tutorial covers a photographic technique for gathering data from an existing part. As an example, we use one of the [[:Brackets_Tutorial_2b:_Fabricating_a_Bracket_from_a_Solidworks_Design#Sheet_Metal_Blank | sheet-metal blanks]] from Tutorial 2b. | ||
Revision as of 23:37, 1 December 2024
Link to: Bracketage Main Page
Introduction
This tutorial covers a photographic technique for gathering data from an existing part. As an example, we use one of the sheet-metal blanks from Tutorial 2b.
