Drill Press Rikon Radial 30-250: Difference between revisions
No edit summary |
No edit summary |
||
| Line 26: | Line 26: | ||
Please refer to the [https://drive.google.com/file/d/1P1xMFsYgFptZKZtsgWhz5zQptrWb8ujy/view?usp=drive_link Rikon 30-250 manual] for more detail on how to make these adjustments. | Please refer to the [https://drive.google.com/file/d/1P1xMFsYgFptZKZtsgWhz5zQptrWb8ujy/view?usp=drive_link Rikon 30-250 manual] for more detail on how to make these adjustments. | ||
'''To change the spindle speed''' | |||
1. Unplug the machine. | |||
2. Open the belt cover. | |||
3. Loosen the belt tension lock (A) and pull forward on the motor (B). | |||
4. Choose the desired speed from the chart on the inside of the cover. | |||
5. Shift the belt on the pulleys to the desired configuration. | |||
6. Push back on the motor to tension the belt. | |||
7. Tighten the belt tension handle. | |||
{| class="infobox" cellspacing="5" style="width: 22em; text-align: left; font-size: 100%; line-height: 1.5em;" | |||
! colspan="2" class="infobox-image" | [[File:rikon_speed_adjustment.png|400px|Rikon speed adj]] | |||
|- | |||
| colspan="2" | Changing the spindle speed on the Rikon drill press. | |||
|- | |||
|} | |||
Revision as of 19:48, 19 February 2024
| Rikon Drill Press | |
|---|---|
File:Wood shop drill press rikon.png The Rikon radial drill press | |
| General Info | |
| Make | Rikon |
| Model | 30-250 |
| Serial | Unknown |
| Specs | |
| Manual | Rikon 30-250 manual |
| Asylum Info | |
| Location | Wood Shop |
| Rubric | |
| Training | |
| Testing | |
| Restrictions | red |
See the Drill Presses category for notes on using all Drill Presses
This is a "radial" drill press.
This machine is held together by a set of cylindrical clamps on various posts that form the machine structure.
This property allows the user to tilt and reposition the drill press head and the table, if desired.
Please refer to the Rikon 30-250 manual for more detail on how to make these adjustments.
To change the spindle speed
1. Unplug the machine.
2. Open the belt cover.
3. Loosen the belt tension lock (A) and pull forward on the motor (B).
4. Choose the desired speed from the chart on the inside of the cover.
5. Shift the belt on the pulleys to the desired configuration.
6. Push back on the motor to tension the belt.
7. Tighten the belt tension handle.
| |
|---|---|
| Changing the spindle speed on the Rikon drill press. |
