Plasmatron Nozzle Assembly Instructions: Difference between revisions
From Artisans Asylum Wiki
No edit summary |
|||
| Line 5: | Line 5: | ||
==Oveview== | ==Oveview== | ||
The Torchmate CNC plasma cutter (also known as the Plasmatron) uses a [https://www.dropbox.com/s/lida6dswhecqvt8/OM_806650_R4_Powermax65-85.pdf?dl=0 Hypertherm PowerMax85] plasma torch as its cutting tool | The Torchmate CNC plasma cutter (also known as the Plasmatron) uses a [https://www.dropbox.com/s/lida6dswhecqvt8/OM_806650_R4_Powermax65-85.pdf?dl=0 Hypertherm PowerMax85] plasma torch as its cutting tool. The torch is carried on the robot gantry in a vertical orientation. The cutting tip consists of an assembly of five parts. It must be assembled by the user and if it isn't done correctly, the machine will fail to cut or it will cut poorly. | ||
==The Torch Parts== | ==The Torch Parts== | ||
Revision as of 10:53, 26 August 2024
Link to: Plasma Shop main page
Oveview
The Torchmate CNC plasma cutter (also known as the Plasmatron) uses a Hypertherm PowerMax85 plasma torch as its cutting tool. The torch is carried on the robot gantry in a vertical orientation. The cutting tip consists of an assembly of five parts. It must be assembled by the user and if it isn't done correctly, the machine will fail to cut or it will cut poorly.
The Torch Parts
The
| |
|---|---|
| 45-Amp large format nozzle (copper) |
| |
|---|---|
| "Fine-Cut" small format nozzle (copper) |
