Cold Saw: Difference between revisions
From Artisans Asylum Wiki
No edit summary |
No edit summary |
||
| Line 33: | Line 33: | ||
* Hardened steel or very small parts | * Hardened steel or very small parts | ||
==Hazard Analysis== | |||
* Tool can be loud. Hearing protection recommended. | |||
* Cutting Tool: Eye protection required. | |||
* Coolant spray can spill on the floor | |||
* '''Prevent drawn-in injuries.''' No loose clothing or gloves. | |||
* Cuts/ scrapes from sharp cut edges of work | |||
Revision as of 15:27, 8 February 2024
| Scotchman Cold Saw | |
|---|---|
| General Info | |
| Make | Scotchman |
| Model | CPO275LT |
| Serial | Unknown |
| Specs | Cold Saw Specifications |
| Manual | Cold Saw Manual |
| Asylum Info | |
| Location | Metal Shop |
| Rubric | |
| Training | Tool classes |
| Testing | Tool testing, or [[:Category:Metal Shop#Tool Testing
Night|come to the shop on Tool Testing Night]] |
| Restrictions | red |
Metal Shop
Use for:
- Best choice for cutting softer metals – Aluminum, Copper, Brass, Bronze.
- Low speed: designed for solid mild steel, solid stainless steel & thick wall pipe.
- High Speed (Not Available): designed for thin wall tube .060 wall thickness or thinner and non-ferrous material.
- Titanium
Do Not Use for:
- Hardened steel or very small parts
Hazard Analysis
- Tool can be loud. Hearing protection recommended.
- Cutting Tool: Eye protection required.
- Coolant spray can spill on the floor
- Prevent drawn-in injuries. No loose clothing or gloves.
- Cuts/ scrapes from sharp cut edges of work
