Abrasive Blade Metal Chop Saw: Difference between revisions
From Artisans Asylum Wiki
No edit summary |
|||
| Line 28: | Line 28: | ||
==Do Not Use for:== | ==Do Not Use for:== | ||
* Aluminum | |||
* Copper | * Copper, Brass, Bronze | ||
''Soft metals will gum up the abrasive cutting disk.'' | ''Soft metals will gum up the abrasive cutting disk.'' | ||
| Line 39: | Line 37: | ||
* Titanium | * Titanium | ||
==Hazard Analysis== | ==Hazard Analysis== | ||
Revision as of 15:03, 9 February 2024
| Abrasive Blade Chop Saw | |
|---|---|
| General Info | |
| Make | Dewalt |
| Model | D28710 |
| Serial | Unknown |
| Specs | |
| Manual | |
| Asylum Info | |
| Location | Metal Shop |
| Rubric | |
| Training | Tool classes |
| Testing | Tool testing, or [[:Category:Metal Shop#Tool Testing
Night|come to the shop on Tool Testing Night]] |
| Restrictions | red |
Metal Shop
Use for:
- Hardened Steel
- Mild Steel
Do Not Use for:
- Aluminum
- Copper, Brass, Bronze
Soft metals will gum up the abrasive cutting disk.
- Zinc (or anything galvanized).
- Titanium
Hazard Analysis
| |
|---|---|
- Tool is very loud. Hearing protection required.
- Flying pieces from broken abrasive discs/ blades. Eye protection required.
- Prevent drawn-in injuries. No loose clothing or gloves.
- Cuts/ scrapes from sharp cut edges of work•Burns from hot work pieces
- Breathing particulates thrown into the air. Respiratory protection recommended.
Operation Notes
 |
 |
Eye protection required! |
|---|---|---|
| |
|---|---|
| Chop Saw clamping tips |
