Carbide Blade Chop Saw (Metal Devil): Difference between revisions
From Artisans Asylum Wiki
No edit summary |
No edit summary |
||
Line 49: | Line 49: | ||
* Prevent drawn-in injuries. '''No loose clothing or gloves.''' | * Prevent drawn-in injuries. '''No loose clothing or gloves.''' | ||
* Cuts/ scrapes from sharp cut edges of | * Cuts/ scrapes from sharp cut edges of work | ||
* Burns from hot workpieces | |||
* Breathing particulates thrown into the air. Respiratory protection recommended. | * Breathing particulates thrown into the air. Respiratory protection recommended. | ||
{{EyeWarning}} | {{EyeWarning}} |
Revision as of 15:39, 9 February 2024
Carbide Blade Chop Saw | |
---|---|
General Info | |
Make | Morse |
Model | CSM14MB |
Serial | Unknown |
Specs | |
Manual | Metal Devil Manual |
Asylum Info | |
Location | Metal Shop |
Rubric | |
Training | Tool classes |
Testing | Tool testing, or [[:Category:Metal Shop#Tool Testing
Night|come to the shop on Tool Testing Night]] |
Restrictions | red |
Use for:
- Cutting through steel and other tough metals.
- See chart belo for recommended cutting capacities.
Do Not Use for:
- Workpieces that exceed the saw’s limits or cannot be secured by the saw’s clamp.
- Never use in damp or wet conditions.
- Never use near flammable liquids or gases.
Hazard Analysis
- Tool is very loud. Hearing protection required.
- Flying pieces from broken abrasive discs/ blades. Eye protection required.
- Prevent drawn-in injuries. No loose clothing or gloves.
- Cuts/ scrapes from sharp cut edges of work
- Burns from hot workpieces
- Breathing particulates thrown into the air. Respiratory protection recommended.
Eye protection required! | ||
---|---|---|